CMT2217A Datasheet | CMOSTEK

CMT2210/17A CMT2210/17A Low-Cost 300 - 960 MHz OOK Stand-Alone RF Receiver Features - Embedded EEPROM - Very Easy Development with RFPDK - All Features Programmable - Frequency Range - 300 to 480 MHz (CMT2210A) - 300 to 960 MHz (CMT2217A) - Symbol Rate: 0.1 to 40 ksps - Sensitivity: -113 d Bm at 1 ksps, 0.1% BER - Configurable Receiver Bandwidth: 50 to 500 k Hz - 3-wire SPI Interface for EEPROM Programming - Stand-Alone, No External MCU Control Required - Configurable Duty-Cycle Operation Mode - Supply Voltage: 1.8 to 3.6 V - Low Power Consumption: 3.8 m A - Low Sleep Current - 60 n A when Sleep Timer Off - 440 n A when Sleep Timer On - Ro HS pliant - 16-pin QFN 3x3 and SOP16 Package Options Descriptions The CMT2210/17A devices are ultra low power, high performance, low-cost OOK stand-alone RF receiver for various 300 to 960 MHz wireless applications. The CMT2210A covers the frequency range from 300 to 480 MHz while the CMT2217A covers the 300 to 960 MHz frequency range. They are part of the CMOSTEK Next Gen RFTM family, which includes a plete line of transmitters, receivers and transceivers. An embedded EEPROM allows the frequency, symbol rate and other Features to be programmed into the device using the CMOSTEK USB Programmer and RFPDK. Alternatively, in stock products of 433.92/868.35 MHz are available for immediate demands without the need of EEPROM programming. When the CMT2210/17A is always on, it consumes only 3.8 m A current while achieving -113 d Bm receiving sensitivity. It consumes even less power when working in duty-cycle operation mode via the built-in sleep timer. The CMT2210/17A receiver together with the CMT211x transmitter enables an ultra low cost RF link. Applications - Low-Cost Consumer Electronics Applications - Home and Building...