Datasheet4U Logo Datasheet4U.com

PS9513 - 1Mbps OPEN COLLECTOR OUTPUT

General Description

The PS9513, PS9513L1, PS9513L2 and PS9513L3 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip.

Key Features

  • Long creepage distance (8 mm MIN. : PS9513L1, PS9513L2).
  • High common mode transient immunity (CM H, CML = 15 kV/ s MIN. ).
  • High-speed response (tPHL = 500 ns MAX. , tPLH = 750 ns MAX. ).
  • Maximum propagation delays (t PLH.
  • Pulse width distortion ( | tPHL.
  • Open collector output.
  • Ordering number of tape product : PS9513L2-E3 : 1 000 pcs/reel : PS9513L3-E3 : 1 000 pcs/reel.
  • Pb-Free product.
  • Safety standards.
  • UL a.

📥 Download Datasheet

Datasheet Details

Part number PS9513
Manufacturer California Eastern Labs
File Size 1.02 MB
Description 1Mbps OPEN COLLECTOR OUTPUT
Datasheet download datasheet PS9513 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PS9505 8-PIN DIP PHOTOCOUPLER Renesas
PS9505L1 8-PIN DIP PHOTOCOUPLER Renesas
PS9505L2 8-PIN DIP PHOTOCOUPLER Renesas
PS9505L3 8-PIN DIP PHOTOCOUPLER Renesas
PS9506 PHOTOCOUPLER Renesas

Other Datasheets by California Eastern Labs

Part Number Description
PS9513L1 1Mbps OPEN COLLECTOR OUTPUT
PS9513L2 1Mbps OPEN COLLECTOR OUTPUT
PS9513L3 1Mbps OPEN COLLECTOR OUTPUT
PS9551L4 HIGH CMR DIGITAL OUTPUT TYPE OPTICAL COUPLED ISOLATION AMPLIFIER (SIGMA-DELTA MODULATOR)
PS9552 HIGH CMR IGBT GATE DRIVE PHOTOCOUPLER 8-PIN DIP PHOTOCOUPLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PHOTOCOUPLER PS9513,PS9513L1,PS9513L2,PS9513L3 1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE NEPOC 8 mm CREEPAGE 8-PIN DIP HIGH-SPEED PHOTOCOUPLER DESCRIPTION The PS9513, PS9513L1, PS9513L2 and PS9513L3 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9513 is designed specifically for high common mode transient immunity (CMR) and low pulse width distortion with operating temperature. It is suitable for IPM drive. The PS9513L1 is lead bending type for long creepage distance. The PS9513L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. The PS9513L3 is lead bending type (Gull-wing) for surface mounting.