Datasheet4U Logo Datasheet4U.com

CAT5126 - One-Time Digitally Programmable 32 Tap Potentiometer

Description

The CAT5126 is a digital programmable potentiometer.

The wiper position is controlled with a simple 2-wire digital interface.

Features

  • Wiper position stored after one-time nonvolatile programming.
  • User-defined Power-On wiper position.
  • 32 tap positions.
  • Wiper position programmed through simple 2-wire serial interface.
  • Low 0.35µA (typ) static supply current.
  • 2.5V to 5.5V single-supply operation.
  • 10kΩ, 50kΩ, and 100kΩ end-to-end resistances.
  • 50ppm/°C end-to-end temperature coefficient and 5ppm/°C ratiometric temperature coefficient.
  • 8-Pin TDFN (2mm x.

📥 Download Datasheet

Datasheet Details

Part number CAT5126
Manufacturer Catalyst Semiconductor
File Size 285.47 KB
Description One-Time Digitally Programmable 32 Tap Potentiometer
Datasheet download datasheet CAT5126 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CAT5126 One-time Digital 32-tap Potentiometer ON Semiconductor
CAT5120 16-Tap MiniPot Digitally Programmable Potentiometers ON Semiconductor
CAT5121 16-Tap MiniPot Digitally Programmable Potentiometers ON Semiconductor
CAT5122 16-Tap MiniPot Digitally Programmable Potentiometers ON Semiconductor
CAT5123 32-tap Digital Potentiometers ON Semiconductor

Other Datasheets by Catalyst Semiconductor

Part Number Description
CAT512 8-Bit Dual Digital POT with Independent Reference Inputs
CAT5120 16-Tap MiniPot TM Digitally Programmable Potentiometers
CAT5121 16-Tap MiniPot TM Digitally Programmable Potentiometers
CAT5122 16-Tap MiniPot TM Digitally Programmable Potentiometers
CAT5123 (CAT5110 - CAT5125) Digitally Programmable Potentiometers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CAT5126 One-Time Digitally Programmable 32 Tap Potentiometer FEATURES „ Wiper position stored after one-time nonvolatile programming „ User-defined Power-On wiper position „ 32 tap positions „ Wiper position programmed through simple 2-wire serial interface „ Low 0.35µA (typ) static supply current „ 2.5V to 5.5V single-supply operation „ 10kΩ, 50kΩ, and 100kΩ end-to-end resistances „ 50ppm/°C end-to-end temperature coefficient and 5ppm/°C ratiometric temperature coefficient „ 8-Pin TDFN (2mm x 3mm) and MSOP packages DESCRIPTION The CAT5126 is a digital programmable potentiometer. The wiper position is controlled with a simple 2-wire digital interface.
Published: |