Datasheet Details
| Part number | 24LC08 |
|---|---|
| Manufacturer | Ceramate Technical |
| File Size | 316.47 KB |
| Description | 8K-Bit Serial EEPROM |
| Datasheet |
|
|
|
|
| Part number | 24LC08 |
|---|---|
| Manufacturer | Ceramate Technical |
| File Size | 316.47 KB |
| Description | 8K-Bit Serial EEPROM |
| Datasheet |
|
|
|
|
I/O Description Input pins for device address selection.
To configure a device address, these pins should be connected to the VCC or VSS of the device.
Ground pin.
24LC08 8K-Bit Serial EEPROM OVERVIEW The 24LC08 serial EEPROM has a 8,192-bit (1,024-byte) capacity, supporting the standard I C -bus serial interface.
It is fabricated using CERAMATE's most advanced CMOS technology.
One of its major’ feature is a hardware-based write protection circuit for the entire memory area.
Hardware-based write protection is controlled by the state of the write-protect (WP) pin.
Using one-page write mode, you can load up to 16 bytes of data into the EEPROM in a single write operation.
Another significant feature of the 24LC08 is its support for fast mode and standard mode.
| Brand Logo | Part Number | Description | Manufacturer |
|---|---|---|---|
![]() |
24LC08B | 8K I2C Serial EEPROM | Microchip |
![]() |
24LC08BH | 8K I2C Serial EEPROM | Microchip |
| Part Number | Description |
|---|