Datasheet4U Logo Datasheet4U.com

CP103 - Dual OP Amp And Voltage Reference

Description

The CP103 is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies.

The device contains two Op Amps and a 2.5V precision shunt voltage reference.

Features

  • increased precision with a corresponding reduction in system complexity and cost. The CP103 is available in standard packages of DIP8 and SOP-8. Features Op Amp.
  • Input Offset Voltage: 0.5mV.
  • Supply Current: 75µA per Op Amp at 5.0V Supply Voltage.
  • Unity Gain Bandwidth: 1MHz.
  • Output Voltage Swing: 0 to (VCC - 1.5) V.
  • Power Supply Range: 3 to 36V Voltage Reference.
  • Fixed Output Voltage Reference: 2.5V.
  • Voltage Tolerance: ± 0.5%, ± 1%.
  • Sink Current Capabilit.

📥 Download Datasheet

Datasheet Details

Part number CP103
Manufacturer Ceramate Technical
File Size 336.53 KB
Description Dual OP Amp And Voltage Reference
Datasheet download datasheet CP103 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CP103x (CP1000 Series) Transhield Transpro Electronics
CP100 PNP Silicon Planar Transistor CDIL
CP1000 SINGLE-PHASE SILICON BRIDGE(VOLTAGE - 50 to 800 Volts CURRENT - P.C. MTG 3A/ HEAT-SINK MTG 10A) Pan Jit International Inc.
CP1000 SINGLE-PHASE SILICON BRIDGE TRSYS
CP1000 Single Phase Bridge Rectifiers Multicomp

Other Datasheets by Ceramate Technical

Part Number Description
CP1032 Chopper Regulators

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com CP103 Dual OP Amp And Voltage Reference General Description The CP103 is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies. The device contains two Op Amps and a 2.5V precision shunt voltage reference. Op Amp 1 is designed for voltage control with its non-inverting input internally connects to the output of the shunt regulator. Op Amp 2 is for current control with both inputs uncommitted. The IC offers the power converter designer a control solution that features increased precision with a corresponding reduction in system complexity and cost. The CP103 is available in standard packages of DIP8 and SOP-8. Features Op Amp · Input Offset Voltage: 0.
Published: |