Pm25LQ032C
Overview
The Pm25LQ032C are 32 Mbit Serial Peripheral Interface (SPI) Flash memories, providing single-, dual or quad-output. The devices are designed to support a 33 MHz fclock rate in normal read mode, and 104 MHz in fast read (Quad outp.
- Single Power Supply Operation - Low voltage range: 2.7 V - 3.6 V
- Memory Organization - Pm25LQ032C: 4096K x 8 (32 Mbit)
- Cost Effective Sector/Block Architecture - 32Mb : Uniform 4KByte sectors / sixty-four uniform 64KByte blocks
- Serial Peripheral Interface (SPI) Compatible - Supports single-, dual- or quad-output - Supports SPI Modes 0 and 3 - Maximum 33 MHz clock rate for normal read - Maximum 104 MHz clock rate for fast read - Maximum 208MHz clock rate equivalent Dual SPI - Maximum 400MHz clock rate equivalent Quad SPI
- Byte Program Operation - Typical 8 us/Byte
- Page Program (up to 256 Bytes) Operation - Typical 1 ms per page program
- Sector, Block or Chip Erase Operation - Sector Erase (4KB) 50ms (Typ) - Block Erase (64KB) 500ms (Typ) - Chip Erase 15S (32Mb)
- Deep power-down mode 1uA (Typ) Security protect function - sector unlock (Appendix 1) 32Mbit Single Operating Voltage Serial Flash Memory With 104 MHz Dual- or 100MHz Quad-Output SPI Bus Interface
- Low Power Consumption - Max 15 mA active read current - Max 20 mA program/erase current - Max 30uA standby current
- Hardware Write Protection - Protect and unprotect the device from write operation by Write Protect (WP#) Pin
