CA-IF1030S Overview
This CAN transceiver series plies with the ISO 11898-2 (2016) CAN (Controller Area Network) physical layer standard and can be directly connected to 3.3V other controllers with CAN control protocol for use. The CA-IF1030S and CA-IF1034S devices have a silent mode, in which the transmitter is turned off and the receiver continues to operate; The CA-IF1033S/ZS device has low power standby mode and remote wake-up...
CA-IF1030S Key Features
- 3.3V single power supply
- Meets the ISO 11898-2:2016 and ISO 11898-5:2007
- Ideal passive behavior when unpowered
- Bus and logic terminals are high impedance (no load)
- Power up/down with glitch free operation on bus and RXD output
- Integrated protection increases robustness
- ±18V fault-tolerant CANH and CANL
- ±12V extended mon-mode input range (CMR)
- Undervoltage protection on VCC
- Transmitter dominant timeout prevents lockup, data rates down to 6.25kbps