GENERAL DESCRIPTION
No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The AP5057 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the AP5057 automatically enters a low current state, dropping the battery drain current to less than 2uA. The AP5057 can be put into shutdown mode, reducing the supply current to 50uA. Other features include Battery temperature monitor, under-voltage lockout, automatic recharge and two status pins to indicate charge and charge termination. FEATURES
z Programmable Charge Current Up to 1000mA z No MOSF...
Chipown
