Click to expand full text
20
NAS 1303 - NAS 1316 Series Specifications
Bolt, Hex Head, Close Tolerance 160,000 PSI Tensile
HEAD MARKING: BASIC PART NO., APPLICABLE DASH NO., AND MANFACTURER’S TRADEMARK RAISED OR DEPRESSED .010 MAX. LOCATION OPTIONAL
POINT SHALL BE FLAT AND CHAMFERED. CHAMFER U. CHAMFER PLUS INCOMPLETE THREADS NOT TO EXCEED TWO PITCHES
(d) DRILL P WHEN SPECIFIED BY PART NO, CSK OPTIONAL CHAMFER 15O TO C OPTIONAL DRILL N (3 HOLES) WITHIN .010 OF CENTER OF HEX FLAT WHEN SPECIFIED BY PART NO. LOCK WIRE HOLES MUST BE FREE FROM BURRS AND SHARP EDGES.
THREAD PER MIL-S-7742, EXCEPT MAJOR DIA TO BE .001 BELOW MIN SHANK DIA.
NAS1305 Datasheet
