900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Coilcraft

DO3316P-223xL Datasheet Preview

DO3316P-223xL Datasheet

SMT Power Inductors

No Preview Available !

Document 179-1www.DataSheet.co.kr
SMTPowerInductors – DO3316PSeries
• High energy storage and very low resistance
• High inductance values are perfect for EL driver applications.
Designer’s Kit C378 contains 3 of each 20% part
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant gold over nickel over phos bronze.
Other terminations available at additional cost.
Weight 0.92 – 1.23 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000 per 13reel Plastic tape: 24 mm wide,
0.33 mm thick, 12 mm pocket spacing, 5.8 mm pocket depth
PCB washing Only pure water or alcohol recommended
Part
number1
DCR SRF
L2 Percent max typ4 Isat5 Irms6
(µH) tol3 (Ohms) (MHz) (A) (A)
DO3316P-102ML_
DO3316P-152ML_
DO3316P-222ML_
DO3316P-332ML_
DO3316P-472ML_
1.0 20
1.5 20
2.2 20
3.3 20
4.7 20
0.009
0.010
0.012
0.015
0.018
100
90
80
65
45
9.0 6.8
8.0 6.4
7.0 6.1
6.4 5.4
5.4 4.8
DO3316P-682_L_ 6.8 20,10 0.027 38 4.6 4.4
DO3316P-103_L_ 10 20,10 0.038 30 3.8 3.9
DO3316P-153_L_ 15 20,10 0.046 27 3.0 3.1
DO3316P-223_L_ 22 20,10 0.085 19 2.3 2.7
DO3316P-333_L_ 33 20,10 0.10 15 2.0 2.1
DO3316P-473_L_
DO3316P-683_L_
DO3316P-104_L_
DO3316P-154_L_
DO3316P-224_L_
47
68
100
150
220
20,10
20,10
20,10
20,10
20,10
0.14
0.20
0.28
0.40
0.61
12 1.6 1.8
10 1.4 1.5
9 1.2 1.3
6 1.0 1.0
5 0.80 0.80
DO3316P-334_L_ 330
DO3316P-474_L_ 470
DO3316P-684_L_ 680
DO3316P-105_L_ 1000
DO3316P-155_L_ 1500
20,10
20,10
20,10
20,10
20,10
1.02
1.27
2.02
3.00
4.49
4.5 0.60 0.60
3.5 0.50 0.50
2.5 0.40 0.40
2.0 0.30 0.30
1.7 0.29 0.27
DO3316P-335_L_ 3300 20,10 8.97
1.1 0.19 0.17
1. When ordering, specify tolerance, termination and packaging codes:
DO3316P-105MLD
Tolerance: M = 20%, K = 10% (Table shows stock tolerances in bold.)
Termination: L = RoHS compliant gold over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: D = 13machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR
meter or equivalent.
3. Tolerances in bold are stocked for immediate shipment.
4. SRF >13 MHz measured using Agilent/HP 8753D network analyzer;
<13 MHz using Agilent/HP 4192A.
5. DC current at which inductance drops 10% (typ) from its value without
current.
6. Current that causes a 40°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Document 179-1 Revised 10/14/08
Datasheet pdf - http://www.DataSheet4U.net/




Coilcraft

DO3316P-223xL Datasheet Preview

DO3316P-223xL Datasheet

SMT Power Inductors

No Preview Available !

www.DataSheet.co.kr
Document 179-2
SMT Power Inductors – DO3316P Series
Typical L vs Frequency
Typical L vs Current
10000
10000
1000
1000 µH
1000 µH
1000
100 µH
100
100 µH
100
10 µH
10
10 µH
10
1 µH
1
1 µH
1
0.1
0.01
0.1 1
Frequency (MHz)
0.1
10 0.1
1 10
Current (A)
100
Current Derating
120
110
100
90
80
70
60
50
40
30
20
10
0
-40
Isat
Irms
-20 0 20 40 60 80 100
Ambient temperature (°C)
120 140
0.370max
9,40
*01.25,1905max
* Allow an additional 0.02/0,508
in width and 0.01/0,254 in
0.125 ±0.010
height for optional tin-lead and
tin-silver-copper application.
3,18 ±0,254
0.145 ±0.010
3,69 ±0,254
0.330
8,38 dia
0.205 max*
5,21
0.100
2,54
Recommended
Land Pattern
0.115
2,92
0.110
2,79
0.100
2,54
0.300
7,62
Internal code
Dash number
0.405
10,29
Start
Finish
Part marking since Feb. 2005. Parts manufactured
prior to that date may have color dots.
Visit www.coilcraft.com/colrpowr.cfm for details.
Dimensions are in
inches
mm
© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Document 179-2 Revised 10/14/08
Datasheet pdf - http://www.DataSheet4U.net/


Part Number DO3316P-223xL
Description SMT Power Inductors
Maker Coilcraft
PDF Download

DO3316P-223xL Datasheet PDF





Similar Datasheet

1 DO3316P-223xL SMT Power Inductors
Coilcraft





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy