Document 186-1
Shielded Power Inductors – DS1608C
These shielded inductors can help achieve significantly
longer battery life in handheld devices and other portable
products.
They offer high efficiency and small size.Their flat top and
heat resistant materials ensure trouble-free assembly and
reflow operations.
0.260
6,60
max
0.070
1,78
0.175
4,45
max
0.115
2,92
max
0.050
1,27
0.055
1,40
Recommended
Land Pattern
0.160
4,06
0.090
2,29
0.140
3,56
Coilcraft will continue to manufacture and support
the DS1608C indefinitely. For new designs, consider
the MSS7341, MSS1038 or LPS4018 as alternatives.
These series are more cost effective and offer better
current handling. In addition, the LPS4018 is a signifi-
cantly smaller part.
0.170
4,32
min
0.040
1,02
0.270
6,86
Dash
number
Part marking since Feb. 2005. Parts manufactured
prior to that date may have color dots.
Visit www.coilcraft.com/colrpowr.cf0m2.1,9f1o25rmdaextails.
0.260
6,60
max
0.070
1,78
0.050
1,27
0.055
1,40
Recommended
Land Pattern
0.160
4,06
0.175
4,45
max
0.090
2,29
0.140
3,56
04.1,3720 min
0.040
1,02
0.270
6,86
Dash
number
Core material Ferrite
Terminations RoHS compliant electroplated gold (<50 µin) over nickel
over moly-manganese. Other terminations available at additional cost.
Weight 144 – 167 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide,
0.28 mm thick, 4 mm pocket spacing, 3 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part marking since Feb. 2005. Parts manufactured
prior to that date may have color dots.
Visit www.coilcraft.com/colrpowr.cfm for details.
Document 186-1 Revised 02/07/14
