900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Coilcraft

EPL2014-601ML Datasheet Preview

EPL2014-601ML Datasheet

Shielded Power Inductors

No Preview Available !

Document 583-1
Shielded PowerInductors– EPL2014
• Extremely low DCR and very high SRF ratings
• Isat ratings as high as 2.8 A
Designer’s Kit C413 contains 5 each of all values
Core material Ferrite
Environmental  RoHS compliant, halogen free
Terminations  Since March, 2009: RoHS compliant tin-silver-copper
(96.5/3/0.5) over tin over nickel over silver-platinum. Prior to March,
2009: RoHS compliant tin‑silver-copper over gold over nickel over silver-
platinum.
Weight  20 – 25 mg
Ambient temperature  –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature  +125°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  2000/7reel; 7500/13reel  Plastic tape:  8 mm wide,
0.28 mm thick, 4 mm pocket spacing, 1.65 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Inductance2
±20% (µH)
DCR (Ohms)3
nom     max
SRF typ4Isat (A)5
(MHz)
10% drop 20% drop 30% drop
Irms (A)6
20°C rise  40°C rise
EPL2014-271ML_ 0.27 0.030 0.036 570 1.50 2.30 2.80
EPL2014-301ML_  This part number has been changed to EPL2014-271. The EPL2014-301 is not available
EPL2014-421ML_ 0.42 0.037 0.044 438 1.40 2.00 2.40
EPL2014-471ML_  This part number has been changed to EPL2014-421. The EPL2014-471 is not available
EPL2014-601ML_ 0.60 0.043 0.052 290 1.20 1.80 2.25
EPL2014-821ML_ 0.82 0.051 0.061 163 0.950 1.40 1.75
EPL2014-102ML_ 1.0 0.059 0.071 153 0.900 1.30 1.68
2.04 2.73
1.93 2.57
1.83 2.43
1.49 2.03
1.43 1.94
EPL2014-152ML_ 1.5
EPL2014-222ML_ 2.2
EPL2014-332ML_ 3.3
EPL2014-472ML_ 4.7
EPL2014-682ML_ 6.8
0.075 0.086
0.120 0.132
0.152 0.167
0.231 0.254
0.287 0.316
109
80
62
46
44
0.720 1.20 1.60
0.600 0.980 1.30
0.540 0.800 1.10
0.380 0.650 0.880
0.350 0.590 0.800
1.34 1.86
1.07 1.42
0.923 1.23
0.788 1.06
0.676 0.915
EPL2014-822ML_ 8.2
EPL2014-103ML_ 10
0.378 0.416 39
0.440 0.459 33
0.290 0.500 0.680 0.640 0.849
0.250 0.450 0.600 0.564 0.729
1. When ordering, please specify termination and packaging codes:
EPL2014-103MLC
Termination: L = RoHS compliant tin-silver-copper over tin over nickel
Special order, added cost: S = non-RoHS tin-lead
(63/37).
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A network analyzer or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 583-1  Revised 09/08/15




Coilcraft

EPL2014-601ML Datasheet Preview

EPL2014-601ML Datasheet

Shielded Power Inductors

No Preview Available !

Document 583-2
SMT Power Inductors – EPL2014 Series
Typical L vs Current
Typical L vs Frequency
100 100
10 10 µH
3.3 µH
1 1.0 µH
0.3 µH
10 10 µH
3.3 µH
1 1.0 µH
0.3 µH
0.1
0.01
0.1 1
Current (A)
10
0.079 ±0.008
2,0 ±0,2
0.079 ±0.008
2,0 ±0,2
Multiplier
2nd
significant
digit
Part Marking
1st
significant
digit
Start
0.057
1,45
max
Finish
0.030
0,75
max
Recommended
Land Pattern
0.057
1,45
0.1
0.1
1 10
Frequency (MHz)
100
Part Marking (Parts manufactured prior to Oct. 20, 2009 may not be marked.)
Part number
EPL2014-271
EPL2014-421
EPL2014-601
EPL2014-821
EPL2014-102
EPL2014-152
EPL2014-222
EPL2014-332
EPL2014-472
EPL2014-682
EPL2014-822
EPL2014-103
Value
0.27 µH
0.42 µH
0.60 µH
0.82 µH
1.0 µH
1.5 µH
2.2 µH
3.3 µH
4.7 µH
6.8 µH
8.2 µH
10 µH
1st digit
Red
Yellow
Blue
Gray
Brown
Brown
Red
Orange
Yellow
Blue
Gray
Brown
2nd digit
Violet
Red
Black
Red 
Black
Green
Red
Orange
Violet 
Gray
Red
Black
Multiplier
Brown
Brown
Brown
Brown
Red
Red
Red
Red
Red
Red
Red
Orange
Note: All marked parts have three dots.Black dot, used only on -601, -102 and
‑103 as second significant digit, may be very difficult to see.
0.069
1,75
max
0.087
2,2
0.014
0,35
min
Dimensions are in
inches
mm
0.041
1,04
Small surface blemishes are not unusual and do not adversely affect performance.
Wire may be visible inside the voids.
Acceptable void sizes:
Top: 0.01 in / 0,254 mm × 0.01 in / 0,254 mm
Sides: 0.02 in / 0,5 mm × 0.047 in / 1,2 mm
Document 583-2  Revised 09/08/15


Part Number EPL2014-601ML
Description Shielded Power Inductors
Maker Coilcraft
Total Page 2 Pages
PDF Download

EPL2014-601ML Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 EPL2014-601ML Shielded Power Inductors
Coilcraft





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy