900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Coilcraft

EPL3010-472ML Datasheet Preview

EPL3010-472ML Datasheet

Shielded Power Inductors

No Preview Available !

Document 615-1
Shielded Power Inductors – EPL3010
• Low profile shielded power inductors, 3 × 3 × 1 mm
• Extremely low DCR,high SRF ratings, Isat ratings up to 2.2 A
Designer’s Kit C431 contains 5 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental  RoHS compliant, halogen free
Terminations  RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over
nickel over silver-platinum. Other terminations available at additional cost.
Weight  32 – 38 mg
Ambient temperature  –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature  +125°C (ambient + temp rise). Derating.
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  2000/7reel; 7500/13reel;  Plastic tape:  8 mm wide,
0.20 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth
PCB washing  Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Inductance2 DCR nom3 DCR max3 SRF typ4Isat (A)5
±20% (µH)
(Ohms)
(Ohms)
(MHz)
10% drop 20% drop 30% drop
Irms (A)6
20°C rise  40°C rise
EPL3010-301ML_ 0.30 0.040 0.045 249
EPL3010-102ML_ 1.0 0.071 0.078 151
EPL3010-152ML_ 1.5 0.086 0.095 116
EPL3010-222ML_ 2.2 0.137 0.150 98
EPL3010-472ML_ 4.7 0.278 0.306 60
1.0 1.6 2.2
0.80 1.3 1.8
0.68 1.1 1.6
0.54 0.92 1.3
0.36 0.61 0.80
1.7 2.2
1.2 1.7
1.2 1.6
0.98 1.3
0.74 0.99
EPL3010-103ML_ 10
EPL3010-223ML_ 22
0.573 0.631 38 0.20 0.34 0.48
1.25 1.38 27 0.18 0.30 0.42
0.52 0.70
0.35 0.47
1. When ordering, please specify packaging code:
EPL3010-103MLC
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A network analyzer or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum
ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 615-1  Revised 09/08/15




Coilcraft

EPL3010-472ML Datasheet Preview

EPL3010-472ML Datasheet

Shielded Power Inductors

No Preview Available !

Document 615-2
SMT Power Inductors – EPL3010 Series
L vs Frequency
L vs Current
100 100
10
1
0.1
0.1
22 µH
10 µH
4.7 µH
2.2 µH
1.5 µH
1.0 µH
0.30 µH
1 10
Frequency (MHz)
10
1
0.1
100 0.01
22 µH
10 µH
4.7 µH
2.2 µH
1.5 µH
1.0 µH
0.1 1
Current (A)
0.30 µH
10
2nd
significant
digit
0.118 ±0.008
3,0 ±0,2
0.118 ±0.008
3,0 ±0,2
Start
0.043
1,1
max
Finish
1st
Multiplier
significant
digit
Part Marking
0.082
2,08
Part Marking (Parts manufactured prior to Oct. 20, 2009 may not be marked.)
Part number
EPL3010-301
EPL3010-102
EPL3010-152
EPL3010-222
EPL3010-472
EPL3010-103
EPL3010-223
Value
0.27 µH
1.0 µH
1.5 µH
2.2 µH
4.7 µH
10 µH
22 µH
1st digit
Orange
Brown
Brown
Red
Yellow
Brown
Red
2nd digit
Black
Black
Green
Red
Violet 
Black
Red
Multiplier
Brown
Red
Red
Red
Red
Orange
Orange
Note: All marked parts have three dots.Black dot, used only on -301, -102 and
‑103 as second significant digit, may be very difficult to see.
0.106 ±0.008
2,69 ±0,20
0.126
3,2
0.043
1,10
min
0.050
1,26
typ
0.030 ±0.008
0,77 ±0,20
0.044
1,12
Recommended
Land Pattern
Dimensions
are in
inches
mm
Small surface blemishes are not unusual and do not adversely affect performance.
Wire may be visible inside the voids.
Acceptable void sizes:
Top: 0.01 in / 0,254 mm × 0.01 in / 0,254 mm
Sides: 0.02 in / 0,5 mm × 0.047 in / 1,2 mm
Document 615-2  Revised 09/08/15


Part Number EPL3010-472ML
Description Shielded Power Inductors
Maker Coilcraft
Total Page 2 Pages
PDF Download

EPL3010-472ML Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 EPL3010-472ML Shielded Power Inductors
Coilcraft





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy