3000W Transient Voltage Suppressor
Stand-off Voltage: 5.0 ~ 440V
Power Dissipation: 3000 Watts
-Glass passivated chip.
-Uni and Bidirection unit.
-Excellent clamping capability.
-Very Fast response time.
-Case: Molded plastic R-6
-Epoxy: UL 94V-0 rate flame retardant.
-Lead: Solderable per MIL-STD-202, method
-Polarity: Color band denotes cathode end
-Weight: 2.1 grams
Dimensions in inches and (millimeter)
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive loaded.
For capacitive load, derated current by 20%.
Peak power dissipation with a 10/1000 μs waveform
Peak pulse current wih a 10/1000 μs waveform
See Next Table
Power dissipation on infinite heatsink at TL=75°C
Peak forward surge current, 8.3mS single
half sine-wave unidirectional only
Maximum instantaneous forward voltage at
100A for unidirectional only (Note 3)
3.5 / 5.0
Operating junction and storage temperature range
-55 to +150
(1) Non-repetitive current pulse, per fig.3 and derated above TA=25°C per Fig. 1.
(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
(3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V.
Company reserves the right to improve product design , functions and reliability without notice. REV:B