CX96429 Datasheet | Conexant Systems

es include: - Integrated high performance ARM™ network processor core with routing and switching packet accelerator engine that enables up to one gigabit data throughput - Dedicated Voice Digital Signal Processor (DSP) which frees up processing power for other applications while supporting two plete Vo IP channels - Flexible x DSL DSP core architecture available in 30MHz, 17MHz bandwidth and 2-pair bonded configurations enabling cost-optimized products for Fiber-To-The-Building (FTTB), Fiber-To-The-Node (FTTN), and CO deployments, respectively - Fully patible with legacy ADSL/2/2plus applications enabling the world’s most interoperable ADSL/2/2plus fallback capabilities CX96xxx devices include a wide variety of interfaces that support plementary home networking technologies to provide a plete system solution for x DSL gateways. The CX96xxx So Cs seamlessly integrate with Conexant’s Smart DAA and Subscriber Line Interface Cards (SLIC)/codec chipsets, providing manufacturers a single-source solution for low-cost turnkey triple play applications. Interfaces such as PCI and GMII are also supported to enable emerging home distribution technologies such as Multimedia over Coax Alliance (Mo CA®), Home PNA™ specification 3.0 and Home Plug® A/V. Distinguishing Features - Flexible VDSL2 DSP core architecture, delivering profiles 8x, 12x, 17a and 30a with long reach - 2 pair VDSL2 bonding - ADSL/ADSL2/ADSL2plus fallback capability - Two Vo IP channels running in internal voice DSP - Supports up to 4 Vo IP narrowband channels or 2 Vo IP wideband channels - Enhanced high performance ARM network processor core - 16/32-bit DDR-1 interface - 32-bit x 33MHz Peripheral ponent Interconnect (PCI) - Gigabit Media Independent Interface (GMII) with Ten-Bit Interface (TBI) and Media Independent Interface (MII) modes - MII in master or slave mode - ULPI interface for USB 2.0 host/device applications - Serial and parallel flash support - Up to 2GB NAND flash support - HW engine handling all...