AFK688M06P44T Datasheet | Cornell Dubilier Electronics

Type AFK - 55 °C to 105 °C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C .. Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Type AFK Capacitors are the best and by a wide margin. With 40% to 60% lower impedance, 30% to 50% smaller case size and more than twice the life pared to low-ESR type AFC, the Type AFK also excels at cold performance down to - 55 °C. In addition, this terrific lowimpedance performance, approaching low-ESR tantalum capacitors, is at a significant cost savings pared to tantalum. The vertical cylindrical cases facilitate automatic mounting and reflow soldering into the same footprint of like-rated tantalum capacitors except without the need for voltage derating. Specifications Highlights - +105 °C, Up to 5000 Hour Load Life - Capacitance Range: 3.3 µF to 6800 µF - Voltage Range: 6.3 Vdc to 100 Vdc - 55 °C to +105 °C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc 3.3 µF to 6800 µF ±20% @ 120 Hz and +20 °C 0.01 CV or 3 µA @ +20 °C, after two minutes (whichever is greater) Frequency 50/60 Hz 0.70 6.3V 0.26 10 V 0.19 16 V 0.16 120 Hz .0.75 25 V 0.14 1 k Hz 0.90 35 V 0.12 50 V 0.1 10 k Hz 0.95 63 V 0.08 100 k Hz 1.00 80 V 0.08 100 V 0.07 Operating Temperature: Rated Voltage: Capacitance: Capacitance Tolerance: Leakage Current: Ripple Current Multiplier: Dissipation Factor: Life Test: AFK Series Marking Capacitance (µF) Voltage j A C E V H J K 2A 6.3Vdc 10Vdc 16Vdc 25Vdc 35Vdc 50Vdc 63Vdc 80Vdc 100Vdc 2000 h @ 105 °C, 4.0 - 10.0 mm dia. 5000 h @ 105 °C, 12.5 - 18.0 mm dia. ∆ Capacitance ±30% DF: ≤ 200% of limit DCL: ≤ 100% of limit Add 0.02 per 1000 µF for values greater that 1000 Shelf Test: Outline Drawing 0.3 mm Max. 1000 h @ 105 °C ∆ Capacitance ±30% DF: ≤ 200% of limit DCL: ≤ 100% of limit Series Case Dimensions Case Code B C D X E F G H P R 4.0 5.0 6.3 6.3 8.0 8.0 10.0 12.5 16.0 18.0 D ± .05 Lot No. L 5.8 ± 0.3 5.8 ± 0.3 5.8 ± 0.3 7.9 ± 0.3 6.2 ± 0.3...