DRA1-CX240D5R Datasheet | Crydom

Description 3-15 VDC Control 4-15 VDC Control 15-32 VDC Control 5A DRA1-CX240D5 DRA1-CXE240D5 5A DRA1-CX240D5-B (2) 5A DRA1-CX240D5R DRA1-CXE240D5R 5A DRA1-CX380D5 DRA1-CXE380D5 5A DRA1-CX380D5R OUTPUT SPECIFICATIONS (1) Description Operating Voltage [VAC] Transient Overvoltage [Vpk] Maximum Load Current [Arms] (3) Minimum Load Current [Arms] Maximum Off-State Leakage Current @ Rated Voltage [m Arms] Minimum off-state dv/dt @ maximum rated voltage [V/µsec] (4) Maximum 1 Cycle Surge Current (50/60 Hz) [Apk] Maximum I²t for fusing (50/60 Hz, 1/2 cycle) [A² sec] Maximum On-State Voltage Drop @ Rated Current [Vpk] CX(E)240x5 12-280 600 5 0.06 0.1 500 239/250 285/260 1.4 CX(E)380x5 48-380- - 1200 5 0.06 0.1 500 239/250 285/260 1.4 INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Typycal Input Current Nominal Input Impedance Maximum Turn-On Time [msec] (5) Maximum Turn-Off Time [µsec] DRA1-CX 3-15 VDC 3.0 VDC 1 .0 VDC 15 m Adc 300 Ohm 1/2 Cycle 1/2 Cycle DRA1-CX240D5-B (2) 4-28 VDC 1.0 VDC 4 .0 VDC 10 m Adc 1360 Ohm 1/2 Cycle 1/2 Cycle DRA1-CX380D5 4-15 VDC 4.0 VDC 1 .0 VDC 15 m Adc 240 Ohm 1/2 Cycle 1/2 Cycle DRA1-CXE 15-32 VDC 15.0 VDC 1 .0 VDC 15 m Adc 1500 Ohm 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation Parameters 4000 VRMS 109 Ohms 10 p F -30 to 80°C -30 to 125 °C 0.063 lb (28.6g) Themally Conductive Epoxy GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) The output is normally closed and does not have a LED status indicator 3) See Derating chart on page 3. 4) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 5) Turn-on time for DC control random turn-on versions is 0.1...