Description
Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) Maximum Load Current (Convection Air) [Arms] (3) Maximum Load Current (Forced Air) [Arms] (3) Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum I² t for fusing (8.3 msec) [A² sec] Minimum Power Factor (with Maximum Load) SPF240 12-280 600 0.1 500 10 25 0.06 250 1.6 260 0.5 SPF380 48-530 1200 0.1 500 10 25 0.06 250 1.6 260 0.5 SPF480 48-660 1200 0.1 500 10 25 0.06 250 1.6 260 0.5 Free Datasheet http://../ INPUT SPECIFICATIONS (1) Description Control Voltage Range Maximum Turn On Voltage Minimum Turn-Off Voltage Typical Input Current @ Nominal Voltage Nominal Input Impedance Maximum Turn-On Time [msec] (4) Maximum Turn-Off Time [msec] SPF240D25 3-15 VDC 3.0 VDC 1.0 VDC 15 mAdc 300 Ohm 1/2 Cycle 1/2 Cycle SPF380D/480D 4-15 VDC 4.0 VDC 1.0 VDC 15 mAdc 240 Ohm 1/2 Cycle 1/2 Cycle SPFExxxD25 15-32 VDC 15.0 VDC 1.0 VDC 15 mAdc 1500 Ohm 1/2 Cycle 1/2 Cycle SPF240A25 90-140 VAC 90.0 Vrms 10.0 Vrms 10 mAdc 14.1 k Ohm 10 40 SPFE240A25 18-36 VAC 18.0 Vrms 2.0 Vrms 10 mAdc 2.1 k Ohm 10 40 GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation Parameters 4000 Vrms 10 9 Ohm 8 pF -30 to 80˚C -30 to 125˚C 0.85 oz. (25g) Thermally Conductive Epoxy GENERAL NOTES 1) All parameters at 25°C unless otherwise specified.
