900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Cypress Semiconductor Electronic Components Datasheet

CY14C101PA Datasheet

1-Mbit (128K x 8) Serial (SPI) nvSRAM

No Preview Available !

CY14C101PA
CY14B101PA
CY14E101PA
1-Mbit (128K × 8) Serial (SPI) nvSRAM
with Real-Time Clock
1-Mbit (128K × 8) Serial (SPI) nvSRAM with Real Time Clock
Features
1-Mbit nonvolatile static random access memory (nvSRAM)
Internally organized as 128K × 8
STORE to QuantumTrap nonvolatile elements initiated
automatically on power-down (AutoStore) or by using SPI
instruction (Software STORE) or HSB pin (Hardware
STORE)
RECALL to SRAM initiated on power-up (Power Up RECALL)
or by SPI instruction (Software RECALL)
Automatic STORE on power-down with a small capacitor
High reliability
Infinite read, write, and RECALL cycles
1 million STORE cycles to QuantumTrap
Data retention: 20 years at 85°C
Real time clock (RTC)
Full-featured RTC
Watchdog timer
Clock alarm with programmable interrupts
Backup power fail indication
Square wave output with programmable frequency (1 Hz,
512 Hz, 4096 Hz, 32.768 kHz)
Capacitor or battery backup for RTC
Backup current of 0.45 µA (typical)
40 MHz, and 104 MHz High-speed serial peripheral interface
(SPI)
40 MHz clock rate SPI write and read with zero cycle delay
104 MHz clock rate SPI write and read (with special fast read
instructions)
Supports SPI mode 0 (0, 0) and mode 3 (1, 1)
SPI access to special functions
Nonvolatile STORE/RECALL
8-byte serial number
Manufacturer ID and Product ID
Sleep mode
Logic Block Diagram
VCC VCAP VRTCcap VRTCbat
Write protection
Hardware protection using Write Protect (WP) pin
Software protection using Write Disable instruction
Software block protection for 1/4, 1/2, or entire array
Low power consumption
Average active current of 3 mA at 40 MHz operation
Average standby mode current of 250 µA
Sleep mode current of 8 µA
Industry standard configurations
Operating voltages:
• CY14C101PA: VCC = 2.4 V to 2.6 V
• CY14B101PA: VCC = 2.7 V to 3.6 V
• CY14E101PA: VCC = 4.5 V to 5.5 V
Industrial temperature
16-pin small outline integrated circuit (SOIC) package
Restriction of hazardous substances (RoHS) compliant
Functional Description
The Cypress CY14X101PA combines a 1-Mbit nvSRAM[1] with
a full-featured RTC in a monolithic integrated circuit with serial
SPI interface. The memory is organized as 128K words of 8 bits
each. The embedded nonvolatile elements incorporate the
QuantumTrap technology, creating the world’s most reliable
nonvolatile memory. The SRAM provides infinite read and write
cycles, while the QuantumTrap cells provide highly reliable
nonvolatile storage of data. Data transfers from SRAM to the
nonvolatile elements (STORE operation) takes place
automatically at power-down. On power-up, data is restored to
the SRAM from the nonvolatile memory (RECALL operation).
You can also initiate the STORE and RECALL operations
through SPI instruction.
For a complete list of related documentation, click here.
Serial Number
8x8
SI
CS
SCK
WP
SO
Power Control
Block
SLEEP
SPI Control Logic
Write Protection
Instruction decoder
Manufacturer ID /
Product ID
RDSN/WRSN/RDID
READ/WRITE
STORE/RECALL/ASENB/ASDISB
Memory Data
&
Address Control
Quantum Trap
128 K x 8
SRAM
128 K x 8
STORE
RECALL
RDRTC/WRTC
WRSR/RDSR/WREN
Status Register
Xin
INT/SQW
Xout
RTC Control Logic
Registers
Counters
Note
1. This device will be referred to as nvSRAM throughout the document.
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 001-54392 Rev. *P
• San Jose, CA 95134-1709 • 408-943-2600
Revised November 13, 2017


Cypress Semiconductor Electronic Components Datasheet

CY14C101PA Datasheet

1-Mbit (128K x 8) Serial (SPI) nvSRAM

No Preview Available !

CY14C101PA
CY14B101PA
CY14E101PA
Contents
Pinout ................................................................................ 3
Pin Definitions .................................................................. 3
Device Operation .............................................................. 4
SRAM Write ................................................................. 4
SRAM Read ................................................................ 4
STORE Operation ....................................................... 4
AutoStore Operation .................................................... 4
Software STORE Operation ........................................ 5
Hardware STORE and HSB pin Operation ................. 5
RECALL Operation ...................................................... 5
Hardware RECALL (Power-Up) .................................. 5
Software RECALL ....................................................... 5
Disabling and Enabling AutoStore ............................... 5
Serial Peripheral Interface ............................................... 6
SPI Overview ............................................................... 6
SPI Modes ......................................................................... 7
SPI Operating Features .................................................... 8
Power-Up .................................................................... 8
Power-Down ................................................................ 8
Active Power and Standby Power Modes ................... 8
SPI Functional Description .............................................. 9
Status Register ............................................................... 10
Read Status Register (RDSR) Instruction ................. 10
Fast Read Status Register (FAST_RDSR)
Instruction ......................................................................... 10
Write Status Register (WRSR) Instruction ................ 10
Write Protection and Block Protection ......................... 11
Write Enable (WREN) Instruction .............................. 11
Write Disable (WRDI) Instruction .............................. 12
Block Protection ........................................................ 12
Hardware Write Protection (WP Pin) ......................... 12
Memory Access .............................................................. 12
Read Sequence (READ) Instruction .......................... 12
Fast Read Sequence (FAST_READ) Instruction ...... 12
Write Sequence (WRITE) Instruction ........................ 13
RTC Access ..................................................................... 15
READ RTC (RDRTC) Instruction .............................. 15
Fast Read Sequence (FAST_RDRTC) Instruction .... 15
WRITE RTC (WRTC) Instruction ............................... 16
nvSRAM Special Instructions ........................................ 16
Software STORE (STORE) Instruction ..................... 16
Software RECALL (RECALL) Instruction .................. 16
AutoStore Enable (ASENB) Instruction ..................... 16
AutoStore Disable (ASDISB) Instruction ................... 17
Special Instructions ....................................................... 17
SLEEP Instruction ..................................................... 17
Serial Number ................................................................. 17
WRSN (Serial Number Write) Instruction .................. 17
RDSN (Serial Number Read) Instruction ................... 18
FAST_RDSN (Fast Serial Number Read)
Instruction ......................................................................... 18
Device ID ......................................................................... 19
RDID (Device ID Read) Instruction ........................... 19
FAST_RDID (Fast Device ID Read) Instruction ........ 20
HOLD Pin Operation ....................................................... 20
Real Time Clock Operation ............................................ 21
nvTIME Operation ..................................................... 21
Clock Operations ....................................................... 21
Reading the Clock ..................................................... 21
Setting the Clock ....................................................... 21
Backup Power ........................................................... 21
Stopping and Starting the Oscillator .......................... 21
Calibrating the Clock ................................................. 22
Alarm ......................................................................... 22
Watchdog Timer ........................................................ 22
Programmable Square Wave Generator ................... 23
Power Monitor ........................................................... 23
Backup Power Monitor .............................................. 23
Interrupts ................................................................... 23
Interrupt Register ....................................................... 23
Flags Register ........................................................... 24
RTC External Components ....................................... 25
PCB Design Considerations for RTC ............................ 26
Layout requirements .................................................. 26
Maximum Ratings ........................................................... 31
Operating Range ............................................................. 31
DC Electrical Characteristics ........................................ 31
Data Retention and Endurance ..................................... 32
Capacitance .................................................................... 32
Thermal Resistance ........................................................ 33
AC Test Loads and Waveforms ..................................... 33
AC Test Conditions ........................................................ 33
RTC Characteristics ....................................................... 34
AC Switching Characteristics ....................................... 34
Switching Waveforms .................................................... 35
AutoStore or Power-Up RECALL .................................. 36
Switching Waveforms .................................................... 37
Software Controlled STORE/RECALL Cycles .............. 38
Switching Waveforms .................................................... 38
Hardware STORE Cycle ................................................. 39
Switching Waveforms .................................................... 39
Ordering Information ...................................................... 40
Ordering Code Definitions ......................................... 40
Package Diagram ............................................................ 41
Acronyms ........................................................................ 42
Document Conventions ................................................. 42
Units of Measure ....................................................... 42
Errata ............................................................................... 43
Part Numbers Affected .............................................. 43
Qualification Status ................................................... 43
Errata Summary ........................................................ 43
Document History Page ................................................. 44
Sales, Solutions, and Legal Information ...................... 46
Worldwide Sales and Design Support ....................... 46
Products .................................................................... 46
PSoC®Solutions ....................................................... 46
Cypress Developer Community ................................. 46
Technical Support ..................................................... 46
Document Number: 001-54392 Rev. *P
Page 2 of 46


Part Number CY14C101PA
Description 1-Mbit (128K x 8) Serial (SPI) nvSRAM
Maker Cypress Semiconductor
Total Page 30 Pages
PDF Download

CY14C101PA Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 CY14C101PA 1-Mbit (128K x 8) Serial (SPI) nvSRAM
Cypress Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy