CY3650 Datasheet Text
1CY 365 0 fax id: 3400
..
PRELIMINARY
CY3650/CY3651
USB Developer’s Kit
USB Development System on the PC includes:
- -
- -
- -
- -
- -
- USB development board Wall transformer power supply (+6V DC, center negative) USB cable RS-232 serial cable 9-pin male to 25-pin female adapter for RS-232 cable Registration Card USB Development System User’s Guide USB Development System Software Guide USB Development System Software (3 disks) CYASM Assembler software (1 disk) Example USB application software included on Assembler disk registers and data RAM. In this mode, firmware can be implemented in on-board EPROM, or downloaded to program RAM. The RAM option provides a quick and easy method for testing firmware revisions. There is also a stand-alone mode which allows portable system operation without the PC attached. In this mode, user firmware is programmed in an EPROM, and only power need be applied to produce a fully operating emulated USB chip. Additionally, the board may be connected to a logic analyzer to facilitate full trace capability and plex breakpoints.
Features
- Full development and debug environment for Cypress Universal Serial Bus Controllers:
- Real-time, full-speed emulation
- Software breakpoints
- Single stepping
- Register, RAM, I/O display/modification
- Debug environment operates without firmware modification
- User code can be run from on-board EPROM or RAM
- Stand-alone operation requires only power connection
- Access to key microcontroller internal signals to enable trace and plex breakpoints
- USB Specification Version 1.1 pliant, 1.5 Mbps speed
- Emulator Board Support for Cypress USB IC family:
- CY3650
- CY7C63000/1, 20-pin DIP/SOIC,Windowed DIP
- CY7C63100/1, 24-pin SOIC, Windowed DIP
- CY7C63200/1, 18-pin DIP,...