900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Cypress Semiconductor Electronic Components Datasheet

S6E1A12C0A Datasheet

Microcontroller

No Preview Available !

S6E1A11B0A/C0A
S6E1A12B0A/C0A
32-Bit ARM® Cortex®
FM0+ based Microcontroller
The S6E1A1 Series is a series of highly integrated 32-bit microcontrollers designed for embedded controllers aiming at low power
consumption and low cost.
This series has the ARM Cortex-M0+ Processor with on-chip Flash memory and SRAM, and consists of peripheral functions such
as various timers, ADCs and communication interfaces (UART, CSIO, I2C, LIN).
The products which are described in this data sheet are placed into TYPE1-M0+ product categories in "FM0+ Family PERIPHERAL
MANUAL".
Features
32-bit ARM Cortex-M0+ Core
Processor version: r0p1
Maximum operating frequency: 40 MHz
Nested Vectored Interrupt Controller (NVIC): 1 NMI
(non-maskable interrupt) and 32 peripheral interrupt with 4
selectable interrupt priority levels
24-bit System timer (Sys Tick): System timer for OS task
management
Bit Band operation
Compatible with Cortex-M3 bit band operation
On-Chip Memories
Flash memory
Up to 88 Kbyte
Read cycle:0 wait-cycle
Security function for code protection
SRAM
The on-chip SRAM of this series has one independent SRAM.
SRAM: 6 Kbyte
Multi-function Serial Interface (Max 3channels)
128 bytes with FIFO in all channels (The number of FIFO
steps varies depending on the settings of the communication
mode or bit length.)
The operation mode of each channel can be selected from
one of the following.
UART
CSIO
LIN
I2C
UART
Full duplex double buffer
Parity can be enabled or disabled.
Built-in dedicated baud rate generator
External clock available as a serial clock
Various error detection functions (parity errors, framing errors,
and overrun errors)
CSIO
Full duplex double buffer
Built-in dedicated baud rate generator
Overrun error detection function
Serial chip select function (ch.1 and ch.3 only)
Data length: 5 to 16 bits
LIN
LIN protocol Rev.2.1 supported
Full duplex double buffer
Master/Slave mode supported
LIN break field generation function (The length is variable
between 13 bits and 16 bits.)
LIN break delimiter generation function (The length is
variable between 1 bit and 4 bits.)
Various error detection functions available (parity errors,
framing errors, and overrun errors)
I2C
Standard-mode (Max: 100 kbps) supported / Fast-mode
(Max 400kbps) supported.
DMA Controller (2 channels)
The DMA Controller has its own bus independent of the CPU,
and CPU and DMA Controller can process simultaneously.
2 independently configurable and operable channels
It can start a transfer with a software request or a request
from a built-in peripheral.
Transfer address area: 32 bits (4 Gbyte)
Transfer mode: block transfer/burst transfer/demand transfer
Transfer data type: byte/halfword/word
Transfer block count: 1 to 16
Number of transfers: 1 to 65536
Cypress Semiconductor Corporation
Document Number: 002-05091 Rev.*A
• 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600
Revised February 10, 2016


Cypress Semiconductor Electronic Components Datasheet

S6E1A12C0A Datasheet

Microcontroller

No Preview Available !

S6E1A11B0A/C0A
S6E1A12B0A/C0A
A/D Converter (Max: 8 channels)
12-bit A/D Converter
Successive approximation type
Conversion time: 0.8 μs @ 5 V (S6E1A1xC0A) / 2.0 μs
(S6E1A1xB0A)
Priority conversion available (2 levels of priority)
Scan conversion mode
Built-in FIFO for conversion data storage (for scan
conversion: 16 steps, for priority conversion: 4 steps)
Base Timer (Max: 4 channels)
The operation mode of each channel can be selected from one
of the following.
16-bit PWM timer
16-bit PPG timer
16/32-bit reload timer
16/32-bit PWC timer
General-purpose I/O Port
This series can use its pin as a general-purpose I/O port when
it is not used for an external bus or a peripheral function. All
ports can be set to fast general-purpose I/O ports or slow
general-purpose I/O ports. In addition, this series has a port
relocate function that can set to which I/O port a peripheral
function can be allocated.
All ports are Fast GPIO which can be accessed by 1cycle
Capable of controlling the pull-up of each pin
Capable of reading pin level directly
Port relocate function
Up to 37 fast general-purpose I/O ports @48pin package
Certain ports are 5 V tolerant.
See "3. Pin Assignment" and "5. I/O Circuit Type" for details
of such pins.
Dual Timer (32/16-bit Down Counter)
The Dual Timer consists of two programmable 32/16-bit down
counters. The operation mode of each timer channel can be
selected from one of the following.
Free-running mode
Periodic mode (= Reload mode)
One-shot mode
Quadrature Position/Revolution Counter (QPRC)
The Quadrature Position/Revolution Counter (QPRC) is used
to measure the position of the position encoder. In addition, it
can be used as an up/down counter.
The detection edge for the three external event input pins
AIN, BIN and ZIN is configurable.
16-bit position counter
16-bit revolution counter
Two 16-bit compare registers
Multi-function Timer
The Multi-function Timer consists of the following blocks.
16-bit free-run timer × 3 channels
Input capture × 4 channels
Output compare × 6 channels
ADC start compare × 6 channel
Waveform generator × 3 channels
16-bit PPG timer × 3 channels
IGBT mode is contained.
The following function can be used to achieve the motor
control.
PWM signal output function
DC chopper waveform output function
Dead time function
Input capture function
ADC start function
DTIF (motor emergency stop) interrupt function
Real-time Clock (RTC)
The Real-time Clock counts
year/month/day/hour/minute/second/day of the week from year
01 to year 99.
The RTC can generate an interrupt at a specific time
(year/month/day/hour/minute/second/day of the week) and
can also generate an interrupt in a specific year, in a specific
month, on a specific day, at a specific hour or at a specific
minute.
It has a timer interrupt function generating an interrupt upon
a specific time or at specific intervals.
It can keep counting while rewriting the time.
It can count leap years automatically.
Document Number: 002-05091 Rev.*A
Page 2 of 95


Part Number S6E1A12C0A
Description Microcontroller
Maker Cypress Semiconductor
Total Page 30 Pages
PDF Download

S6E1A12C0A Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 S6E1A12C0A Microcontroller
Cypress Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy