S6E2C1AL0A Datasheet | Cypress

FM4: S6E2C Series Microcontroller Datasheet 200 MHz Arm® Cortex®-M4F High-Performance MCU The FM4 S6E2C Series provides a highly integrated single chip solution with 200 MHz of CPU power, up to 2 Mbytes of dual banked high speed on chip flash memory, up to 256 Kbytes of on chip SRAM, and integrated peripheral Features including IEEE 1588 pliant 10/100 base Ethernet, CAN, CAN-FD, USB and inverter control timers. S6E2C Series Features High Performance MCU Subsystem - 675 Core Mark®, 200 MHz Arm® Cortex®-M4F CPU - 365 µA/MHz active current with 2.7 V to 5.5 V operating voltage - Ultra-low power 1.0 µA real-time clock (RTC) operating current - Up to 2 MB flash and 256 KB SRAM with 16 KB flash accelerator - Error-Correcting Code (ECC) support, hardware WDT1, low- voltage detect, and clock supervisor blocks for safety-critical applications Analog Subsystem - 3x independent 12-bit, 2-Msps ADCs with a 32-channel multiplexer input - 2x dedicated 12-bit digital-to-analog converters (DACs) Digital Subsystem - 3x Multi-Function Timers (MFT) - 9x Programmable Pulse Generators (PPG) - 16x Base Timers, 4x Quadrature Position/Revolution Counters (QPRC) - 1x Dual Timer, 2x CRC, and Watch Counter - 16 channels of Multi-Function Serial (MFS) interfaces configurable as SPI, UART, I2C, or LIN - 2x USB, 2x CAN, CAN-FD, IEEE 1588 Ethernet, High Speed Quad-SPI (HS-QSPI), I2S, and External Bus Interfaces Cypress Semiconductor Corporation Document Number: 002-04980 Rev. - E - 198 Champion Court - San Jose, CA 95134-1709 - 408-943-2600 S6E2C Series Datasheet Revised May 10, 2023 S6E2C Series Ecosystem for Cypress FM4 MCUs Cypress provides a wealth of data at http://.cypress. to help you to select the right MCU for your design, and to help you to quickly and effectively integrate the device into your design. Following is an abbreviated list for FM4...