Datasheet4U Logo Datasheet4U.com

DM9102A - Single Chip Fast Ethernet NIC controller

General Description

The DM9102A is a fully integrated and cost-effective single chip Fast Ethernet NIC controller.

It is designed with the low power and high performance process.

It is a 3.3V device with 5V tolerance then it supports 3.3V and 5V signaling.

Key Features

  • 4 Pin Configuration: DM9102A 128pin QFP 5 Pin Configuration: DM9102A 128pin TQFP 6 Pin.

📥 Download Datasheet

Datasheet Details

Part number DM9102A
Manufacturer DAVICOM
File Size 578.89 KB
Description Single Chip Fast Ethernet NIC controller
Datasheet download datasheet DM9102A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DM9131 10/100Mbps Fast Ethernet Physical Layer Single Chip Transceiver Davicom Semiconductor Incorporated
DM930 DTL National Semiconductor
DM9308 Dual 4-Bit Latch National
DM9309 Dual 4-Bit Data Selectors/Multiplexers National
DM9321 DUAL 1-OF-4 DECODER National Semiconductor

Other Datasheets by DAVICOM

Part Number Description
DM9102D SINGLE CHIP FAST ETHEMET NIC CONTROLLER
DM9102H Single Chip Fast Ethernet NIC Controller
DM9101 10/100Mbps Ethernet Physical Layer Single Chip Transceiver
DM9106 10/100 Mbps 3-port Ethernet Switch Controller
DM9161 10/100 Mbps FAST ETHERNET PHYSICAL LAYER SINGLE CHIP TRANSCEIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com DM9102A Single Chip Fast Ethernet NIC controller General Description The DM9102A is a fully integrated and cost-effective single chip Fast Ethernet NIC controller. It is designed with the low power and high performance process. It is a 3.3V device with 5V tolerance then it supports 3.3V and 5V signaling. The DM9102A provides direct interface to the PCI or the CardBus. It supports bus master capability and fully complies with PCI 2.2. In media side, The DM9102A interfaces to the UTP3,4,5 in 10Base-T and UTP5 in 100Base-TX. It is fully compliance with the IEEE 802.3u Spec. Its auto-negotiation function will automatically configure the DM9102A to take the maximum advantage of its abilities. The DM9102A is also support IEEE 802.3x fullduplex flow control.