DC COMPONENTS CO., LTD.
R RECTIFIER SPECIALISTS
SA5.0
THRU
SA220CA
TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE RANGE - 5.0 to 220Volts PEAK PULSE POWER - 500 Watts
FEATURES
* Glass passivated junction
* 500 Watts Peak Pulse Power capability on
10/1000 µs waveform
* Excellent clamping capability
* Low zener impedance
* Fast response time
DO-15
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: MIL-STD-202E, Method 208 guaranteed
* Polarity: Color band denotes positive end (cathode)
except bidirectional types
* Mounting position: Any
* Weight: 0.4 gram
1.0 (25.4)
MIN.
.034 (0.9)
.028 (0.7) DIA.
.300 (7.6)
.230 (5.8)
1.0 (25.4)
MIN.
.140 (3.6)
.104 (2.6) DIA.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25OC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load,
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA suffix (e.g. SA5.0C, SA220CA).
Electrical characteristics apply in both directions
Peak Pulse Power Dissipation on 10/1000 µs waveform
(Note1,FIG.1)
Steady State Power Dissipation at T = 75OC
Lead Lengths .375"(9.5mm) (Note 2)
SYMBOL
PPPM
PM(AV)
VALUE
Minimum 500
1.0
Peak Forward Surge Current, 8.3ms single half sine-wave
superimposed on rated load(JEDEC Method) (Note 3)
IFSM
Maximum Instantaneuos Forwaard Voltage at 50A for Unidirectional
only
VF
Operating and Storage Temperature Range
TJ , TSTG
NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25OC per Fig. 2.
2. Mounted on Copper Leaf area of 1.6 X 1.6"( 40 X 40mm ) per Fig. 5
3. 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
70
3.5
-55 to + 175
UNITS
Watts
Watts
Amps
Volts
OC
