AP2210 - 300mA RF ULDO REGULATOR

Product Overview

DIODES

Datasheet Details

Part number	AP2210
Manufacturer	DIODES
File Size	709.78 KB
Description	300mA RF ULDO REGULATOR
Datasheet	AP2210 Datasheet
Additional preview pages of the AP2210 datasheet.

Product details

Description

The AP2210 is a 300mA ULDO regulator which provides very low noise, ultra-low dropout voltage (typically 250mV at 300mA), very low standby current (1µA maximum), and excellent power supply ripple rejection (PSRR 75dB at 100Hz).

Features

individual logic compatible enable/shutdown control inputs, a low power shutdown mode for extended battery life, overcurrent protection, overtemperature protection, and reversed current protection. The AP2210 has 2.5V, 2.8V, 3.0V, 3.3V, 3.6V, 4.0V, 5.0V, and ADJ versions. The AP2210 is available in the space saving SOT-23-3 and SOT-23-5 packages. Pin Assignments (Top View) VIN 3 1 2 GND VOUT SOT-23-3 (Top View) VIN 1 GND 2 EN 3 5 VOUT 4 BYP/ADJ SOT-23-5 Features.
Up to 300mA.

📁 Similar Datasheet

AP2213 - LOW NOISE LDO REGULATOR (BCD Semiconductor)
AP2218 - LOW DROPOUT LINEAR REGULATOR (BCD Semiconductor)
AP2201 - RF ULDO REGULATOR (BCD Semiconductor)
AP2202 - RF ULDO REGULATOR (BCD Semiconductor)
AP2203 - RF ULDO REGULATOR (BCD Semiconductor)
AP2204 - 150mA ULDO REGULATOR (Diodes)
AP2205 - 200mA ULDO REGULATOR (Diodes)
AP22615 - SINGLE CHANNEL POWER DISTRIBUTION SWITCH (Diodes)

Other Datasheets by DIODES

AP221448 - 2.5A LOAD SWITCH
AP221614 - 4A LOAD SWITCH
AP220309 - 4A LOAD SWITCH
AP22816 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
AP22817 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
AP22818 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

Published: Nov 24, 2023 |