Datasheet4U Logo Datasheet4U.com

DIO3222 - USB2.0 Hi-Speed Switch

Description

The DIO3222 is a low power, dual SPDT 2-port high-speed analog switch.

It handles bi-directional signal flow and is optimized for switching a hi-speed (480Mbps) source or a full-speed (12Mbps) source.

Features

  • VCC operation at 2.7V to 4.2V Low Con: 6.5pF Typical Low Ron: 6Ω Typical Low Power Consumption: 1µA Maximum Low ICCT : 15µA Maximum @VIN=1.8V, VCC=3.6V -3dB Bandwidth: > 720MHz Packaged in Pb-free DQFN-10; MSOP-10 and QFN-10 8kV HBM ESD Rating 2kV CDM ESD Rating Power-Off/On Protection on Common port. D+/D- Pins Tolerate up to 5.25V.

📥 Download Datasheet

Datasheet Details

Part number DIO3222
Manufacturer DIOO MICROCIRCUITS
File Size 334.29 KB
Description USB2.0 Hi-Speed Switch
Datasheet download datasheet DIO3222 Datasheet

📁 Similar Datasheet

Other Datasheets by DIOO MICROCIRCUITS
  • DIO3303 - 3:1 USB 2.0 High-Speed USB Switch
  • DIO3581 - Rail-to-Rail I/O CMOS Amplifier
  • DIO3712 - High-bandwidth and Low on-resistance Analog switch
  • DIO1159B - Low THD Analog Switch
  • DIO1280 - Over-Voltage Protection Load Switch
  • DIO1500 - Four-pole single-throw (4PST) Depletion Mode Isolation Switch
  • DIO20721 - RRIO 10MHz Amplifier
  • DIO20721D - RRIO 10MHz Amplifier

Full PDF Text Transcription

Click to expand full text
DIO3222 November 2010 DIO3222 Low-Power, USB2.0 Hi-Speed Switch Features VCC operation at 2.7V to 4.2V Low Con: 6.5pF Typical Low Ron: 6Ω Typical Low Power Consumption: 1µA Maximum Low ICCT : 15µA Maximum @VIN=1.8V, VCC=3.6V -3dB Bandwidth: > 720MHz Packaged in Pb-free DQFN-10; MSOP-10 and QFN-10 8kV HBM ESD Rating 2kV CDM ESD Rating Power-Off/On Protection on Common port. D+/D- Pins Tolerate up to 5.25V Description The DIO3222 is a low power, dual SPDT 2-port high-speed analog switch. It handles bi-directional signal flow and is optimized for switching a hi-speed (480Mbps) source or a full-speed (12Mbps) source. DIO3222 has high channel-to-channel noise isolation and low bit-to-bit skew which allows it to pass high-speed differential signals with good signal integrity.
Published: |