Datasheet4U Logo Datasheet4U.com

DIO7004 - 5.5V Low Loss Power Distribution Switch

General Description

The DIO7004 power distribution switch is intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered.

The power switch rising and falling times are controlled to minimize current surges during turning on/off.

Key Features

  • Input voltage: 2.7V to 5.5V.
  • Typical 75mΩ on-resistance.
  • Output discharge resistance.
  • Five different continuous current versions.
  • Under voltage lockout.
  • Over current protection, short circuit protection and over temperature protection.
  • Fault time 5ms typically with blanking.
  • Reverse blocking (no body diode).
  • No reverse current when power ON or power OFF.
  • Enable polarity: active high or active low.
  • Green SOT23-5, SOIC-8, EP-MSOP8 and MSOP-8.

📥 Download Datasheet

Datasheet Details

Part number DIO7004
Manufacturer DIOO MICROCIRCUITS
File Size 644.94 KB
Description 5.5V Low Loss Power Distribution Switch
Datasheet download datasheet DIO7004 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by DIOO MICROCIRCUITS

Part Number Description
DIO7195 5.5V Full-Function 2.5A DC Load Switch
DIO7231 5.5V Low Loss Power Distribution Switch
DIO7231B 5.5V Low Loss Power Distribution Switch
DIO1159B Low THD Analog Switch
DIO1280 Over-Voltage Protection Load Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DIO7004 5.5V Low Loss Power Distribution Switch Rev 1.1 Features  Input voltage: 2.7V to 5.5V  Typical 75mΩ on-resistance  Output discharge resistance  Five different continuous current versions  Under voltage lockout  Over current protection, short circuit protection and over temperature protection  Fault time 5ms typically with blanking  Reverse blocking (no body diode)  No reverse current when power ON or power OFF  Enable polarity: active high or active low  Green SOT23-5, SOIC-8, EP-MSOP8 and MSOP-8 packages Descriptions The DIO7004 power distribution switch is intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered.