Datasheet4U Logo Datasheet4U.com

DS26334 - E1/T1/J1 Shortand Long-Haul Line Interface Unit

📥 Download Datasheet

Datasheet Details

Part number DS26334
Manufacturer Dallas Semiconductor
File Size 832.09 KB
Description E1/T1/J1 Shortand Long-Haul Line Interface Unit
Datasheet download datasheet DS26334 Datasheet

General Description

The DS26334 is a 16-channel short/long-haul line interface unit (LIU) that supports E1/T1/J1 from a single 3.3V power supply.

A single bill of material can support E1/T1/J1 that requires no external termination.

Redundancy is supported through nonintrusive monitoring, optimal high-impedance modes and configurable 1:1 or 1+1 backup enhancements.

Overview

www.DataSheet4U.com DS26334 3.3V, 16-Channel, E1/T1/J1 Shortand Long-Haul Line Interface Unit www.maxim-ic.

Key Features

  • 16 E1, T1, or J1 Short/Long-Haul Line Interface Units Independent E1, T1 or J1 Selections Fully Internal Impedance Match Requires No External Resistors Software-Selectable Transmit and ReceiveSide Impedance Match Crystal-Less Jitter Attenuator Selectable Single-Rail and Dual-Rail Mode and AMI or HDB3/B8ZS Line Encoding and Decoding Detection and Generation of AIS Digital/Analog Loss of Signal Detection as per T1.231, G.775 and ETS 300 233 External Master Clock Can Be Multiple of 2.048MHz or 1.54.

More Datasheets from Dallas Semiconductor

Part Number Description
DS26324 E1/T1/J1 Short-Haul Line Interface Unit
DS2110 Plug and Play SCSI Terminator
DS2117M Ultra3 LVD/SE SCSI Terminator
DS2250 Soft Microcontroller Module
DS2282 T1 FDL Controller/Monitor Stik
DS2290 T1 Isolation Stik
DS2501 512-Bit Add-Only Memory
DS2502-UNW UniqueWare Add-Only Memory
DS2505-UNW UniqueWare Add-Only Memory
DS2506-UNW (DS250x-UNW) UniqueWare Add-Only Memory