G104SN03V0 Datasheet | Data Modul

Description 2.1 Display Characteristics 2.2 Functional Block Diagram Absolute Maximum Ratings Optical Characteristics Signal Interface 5.1 Connectors 5.2 Signal Pin 5.3 Signal Description 5.4 Signal Electrical Characteristics Pixel Format Image Power Consumption Interface Timing 8.1 Display Color v.s. Input Data Signal 8.2 Input Signal Timing 8.3 Display Position Backlight Characteristics Reliability Test Items Display Quality Packing Dimension Mechanical Characteristic . 5 6 3.0 4.0 5.0 9 10 12 6.0 7.0 8.0 16 17 19 et4U. Data Shee 9.0 10.0 11.0 12.0 13.0 23 24 24 25 26 . (C) Copyright AU Optronics, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G104SN03 V.0 3/26 Data Sheet 4 U . .. II. Record of Revision Version and Date Page 1.0 Feb. 6, 2004 All Old description N/A New Description First Edition for Customers Remark et4U. Data Shee . . (C) Copyright AU Optronics, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G104SN03 V.0 4/26 4 U . Data Sheet .. 1.0 Handing Precautions 1) Since front polarizer is easily damaged, pay attention not to scratch it. 2) Be sure to turn off power supply when inserting or disconnection from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. 7) Do not open nor modify the module Assembly. 8) Do not press the reflector sheet at the back of the module to any directions. 9) In case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the...