MCR101-MCR104 SERIES
High-reliability discrete products
and engineering services since 1977
SILICON CONTROLLED RECTIFIERS
FEATURES
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.
MAXIMUM RATINGS.
Rating
Symbol
Value
Peak reverse blocking voltage
MCR101
MCR102
MCR103
MCR104
Forward current RMS (all conduction angles)
Peak forward surge current (1/2 cycle, sine wave 60 Hz, TA = 25°C)
Circuit fusing considerations (t = 1 to 8.3ms, TA = 25°C)
Forward peak gate power (TA = 25°C)
Forward average gate power (TA = 25°C)
Forward peak gate current (TA = 25°C, 300µs, 120PPS)
Reverse peak gate voltage
Operating junction temperature range @ rated VRRM and VDRM
Storage temperature range
Lead solder temperature (<1/16” from case, 10 sec. max.)
VRRM
IT(RMS)
ITSM
I2t
PGM
PG(AV)
IGM
VGM
TJ
Tstg
-
15
30
60
100
0.8
6.0
0.15
0.1
0.01
1.0
4.0
-65 to +85
-65 to +150
+230
THERMAL CHARACTERISTICS
Characteristic
Thermal resistance, junction-to-case
Thermal resistance, junction-to-ambient
Symbol
RθJC
RθJA
Max
75
200
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Characteristic
Peak forward blocking voltage(1) (TC = 85°C)
MCR101
MCR102
MCR103
MCR104
Peak forward blocking current (Rated VDRM @ TC = 85°C)
Peak reverse blocking current (Rated VRRM @ TC = 85°C)
Forward “on” voltage(2) (ITM = 1.0A peak @ TA = 25°C)
Gate trigger current (continuous dc)(3) (VAK = 7Vdc, RL = 100Ω, TC = 25°C)
Gate trigger voltage (continuous dc) (VAK = 7Vdc, RL = 100Ω)
TC = 25°C
TC = -65°C
TC = 85°C
Holding current (VAK = 7Vdc, initiating current = 20mA)
TC = 25°C
TC = -65°C
Symbol Min Max
15 -
vDRM 30 -
60 -
100 -
IDRM - 100
IRRM - 100
VTM - 1.7
IGT - 200
VGT - 0.8
- 1.2
VGD 0.1 -
IH - 5.0
- 10
Unit
Volts
Amps
Amps
A2s
Watts
Watts
Amps
Volts
°C
°C
°C
Unit
°C/W
°C/W
Unit
Volts
µA
µA
Volts
µA
Volts
mA
Rev. 20130128
