8-BIT SHIFT REGISTER WITH 8-BIT OUTPUT REGISTER
The 74HC594 is a high speed CMOS device.
An eight bit shift register accepts data from the serial input (DS) on
each positive transition of the shift register clock (SHCP). When
asserted low, the shift regisister reset function (SHR) sets all shift
register values to zero and is independent of all clocks. Also when
asserted low, the storage register reset function (STR) sets all shift
register values to zero and is independent of all clocks.
Data from the input serial shift register is placed in the output register
with a rising pulse on the storages resister clock (STCP). The
storage resister includes output Q7S which is used for cascading
information between devices. As the information moves into the
storage register, it is asserted on the push-pull outputs Q0-Q7.
All registers capture data on rising edge and change output on the
falling edge. If both clocks are connected together, the input shift
register is always one clock cycle ahead of the output register.
( Top View )
SO-16 / TSSOP-16
Wide Supply Voltage Range from 2.0V to 6.0V
Sinks or sources 8mA at VCC= 4.5V
CMOS low power consumption
Schmitt Trigger Action at All Inputs
Inputs accept up to 6.0V
ESD Protection Tested per JESD 22
Exceeds 200-V Machine Model (A115-A)
Exceeds 2000-V Human Body Model (A114-A)
Exceeds 1000-V Charged Device Model (C101C)
Latch-Up Exceeds 250mA per JESD 78, Class II
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
General Purpose Logic
Serial to Parallel Data conversion
Capture and hold data for extended periods of time.
Allow simple serial bit streams from a microcontroller to control as
many peripheral lines as needed.
Wide array of products such as:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Click here for ordering information, located at the end of datasheet
Document number: DS35484 Rev. 3 - 2
1 of 10
© Diodes Incorporated