Description
The AH3562Q is an AECQ100-qualified high-voltage, high-sensitivity
Hall effect omnipolar switch IC designed for position and proximity
sensing in automotive applications, such as in seat and seatbelt
buckles, steering lock/immobilization, gear stick, transmission
actuator and gear position, HVAC compression, wiper, door/trunk
closure, and so on. To support a wide range of demanding
applications, the design is optimized to operate over the supply range
of 3.0V to 28V. With chopper-stabilized architecture and an internal
bandgap regulator to provide temperature compensated supply for
internal circuits, the AH3562Q provides a reliable solution over the
whole operating range. For robustness and protection, the device has
a reverse blocking diode with a zener clamp on the supply. The
output has an over current limit and a zener clamp.
The single open-drain output can be switched on with a south or north
pole of sufficient strength. When the magnetic flux density (B)
perpendicular to the package is larger than the operate point (BOP)
the output is switched on (pulled low) and stays on until the magnetic
flux density B is lower than the release point (BRP).
AH3562Q
HIGH VOLTAGE HIGH SENSITIVITY
AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH
Pin Assignments
(Top View)
GND 2
3 OUTPUT
1 VDD
SOT23
(Top View)
SIP-3 (Bulk Pack)
3. OUTPUT
2. GND
1. VDD
Features
• Omnipolar Operation
• High Sensitivity: BOP and BRP of ±20G and ±10G Typical
• Single Open-Drain Output with Overcurrent Limit
• 3.0V to 28V Operating Voltage Range
• Chopper-Stabilized Design Provides
o Superior Temperature Stability
o Minimal Switch Point Drift
o Enhanced Immunity to Stress
• Good RF Noise Immunity
• Reverse Blocking Diode
• Zener Clamp on Supply and Output Pins
• -40°C to +150°C Operating Temperature
• ESD: HBM > 8kV, CDM: >2kV
• Industry Standard SOT23 and SIP-3 (Ammo Pack), SIP-3
(Bulk Pack) Packages
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
Applications
• Position and Proximity Sensing in Automotive Applications
• Open and Close Detect
• Position Detect
• Level Detect
• Flow Meters
• Contactless Switches
• Seatbelt Buckle
• Seat Position
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
AH3562Q
Document number: DS40864 Rev. 1 - 2
1 of 14
www.diodes.com
July 2018
© Diodes Incorporated