Datasheet4U Logo Datasheet4U.com

AH8500 - LOW POWER/MICROPOWER LINEAR HALL EFFECT SENSOR

General Description

The AH8500 is a low power/micropower linear Hall effect sensor with an 8-bit output resolution.

The output voltage is ratiometric to the supply voltage and proportional to the magnetic flux density perpendicular to the part marking surface.

Key Features

  • Linear Hall Effect Sensor with +/-430G Sense Range and Output Voltage with 8-bit resolution.
  • Supply Voltage of 1.6V to 3.6V.
  • Sensitivity: 2.1mV/G and 3.55mV/G at 1.8V and 3V at +25oC.
  • Low Offset Voltage.
  • Low Average Supply Current.
  • 8.9µA Typical in Sleep Mode (Default) at 1.8V.
  • 1.01mA Typical in Auto-Run Mode ( 6.25kHz) at 1.8V.
  • 12µA Typical in External Drive Mode with 20Hz Sample Rate at 1.8V.
  • 1.16mA Typical in External Drive Mode with 7.14kHz Sampl.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AH80W ALUMINUM HOUSED RESISTORS HITANO
AH810 Hall current sensor Alfa Electronics
AH8102 ULTRA-SENSITIVE HALL EFFECT SWITCH AiT Semiconductor
AH8103 ULTRA-SENSITIVE HALL SWITCH AiT Semiconductor
AH810S Hall current sensor Alfa Electronics

Other Datasheets by Diodes Incorporated

Part Number Description
AH8501 HIGH ACCURACY LOW POWER / MICROPOWER LINEAR HALL EFFECT SENSOR
AH8502 MICROPOWER LINEAR HALL EFFECT SENSOR
AH8503 HIGH ACCURACY MICROPOWER LINEAR HALL EFFECT SENSOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NEW PRODUCT AH8500 LOW POWER/MICROPOWER LINEAR HALL EFFECT SENSOR Description Pin Assignments The AH8500 is a low power/micropower linear Hall effect sensor with an 8-bit output resolution. The output voltage is ratiometric to the supply voltage and proportional to the magnetic flux density perpendicular to the part marking surface. The output null voltage is at half the supply voltage. AH8500 has a typical sensitivity of 2.1mV/G and 3.55mV/G at 1.8V and 3V. The typical null voltage offset is less than 1% of VDD. The device has a typical input referred rms noise of 0.36G and 0.24G at 1.8V and 3.0V. Designed for battery powered consumer equipment to office equipment, home appliances and industrial applications, the AH8500 can operate over the supply range of 1.6V to 3.