Datasheet4U Logo Datasheet4U.com

AH9247 - MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH

Description

The AH9247 is a high sensitivity Hall-effect switch with internal pullup resistor on the output, designed for battery-operation, handheld equipments.

A chopper stabilized amplifier improves stability of magnetic switch points.

A sleep-awake logic controls the IC in sleep time or awake time.

Features

  • Micropower Operation.
  • 2.5V to 5.5V Power Supply.
  • Switching for Both Poles of a Magnet (Omnipolar).
  • Stabilized Chopper.
  • Superior Temperature Stability.
  • Digital Output Signal.
  • Built-in Pullup Resistor.
  • ESD (HBM): 6000V.
  • Small Low Profile DFN-2X2-3, Industry-Standard SC59 and TO92S (TYPE B) Packages.
  • Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2).
  • Halogen and Antimony Free. “Green” Device (No.

📥 Download Datasheet

📁 Similar Datasheet

  • AH9247 - High Sensitivity Micropower Omnipolar Hall-Effect Switch (BCD)
  • AH9248 - High Sensitivity Micropower Omnipolar Hall-Effect Switch (BCD)
  • AH9249 - High Sensitivity Micropower Omnipolar Hall-Effect Switch (BCD)
  • AH920 - HIGH SENSITIVITY CMOS HALL-EFFECT LATCH (BCD)
  • AH920 - Differential high-performance Hall current sensor (Alfa Electronics)
  • AH921 - HIGH SENSITIVITY CMOS HALL-EFFECT LATCH (BCD)
  • AH922 - UNIPOLAR HALL-EFFECT SWITCH (BCD)
  • AH9279 - TWO PHASE DUAL-COIL CMOS SMART FAN MOTOR DRIVER (BCD)
  • AH9280 - Two Phase Dual-coil High Voltage Smart Fan Motor Driver (BCD)
  • AH9281 - Two Phase Dual-coil High Voltage Smart Fan Motor Driver (BCD)
Other Datasheets by Diodes
  • AH9246 - ULTRA HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH
  • AH9249 - HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH
  • AH920 - HIGH SENSITIVITY CMOS HALL-EFFECT LATCH
  • AH9250 - HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH
  • AH9251 - MEDIUM SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH
  • AH9485 - SINGLE PHASE LOW NOISE SMART MOTOR DRIVER
  • AH9486 - SINGLE PHASE LOW NOISE SMART MOTOR DRIVER

Full PDF Text Transcription

Click to expand full text
AH9247 HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description The AH9247 is a high sensitivity Hall-effect switch with internal pullup resistor on the output, designed for battery-operation, handheld equipments. A chopper stabilized amplifier improves stability of magnetic switch points. A sleep-awake logic controls the IC in sleep time or awake time. This function will reduce the average operating current of the IC. During the awake time, the output is changed with the magnetic flux density. During the sleep time, the output is latched in its previous state and the current consumption will reduce to some µA. The output can be switched on with either north or south pole of sufficient strength.
Published: |