900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Diodes Semiconductor Electronic Components Datasheet

AP2411 Datasheet

2.0A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH

No Preview Available !

  Green
AP2401/AP2411
2.0A SINGLE CHANNEL CURRENT-LIMITED
POWER SWITCH WITH LATCH-OFF
Description
The AP2401 and AP2411 are single channel current-limited
integrated high-side power switches optimized for Universal Serial
Bus (USB) and other hot-swap applications. The family of devices
complies with USB standards and is available with both polarities of
enable input.
The devices have fast short-circuit response time for improved overall
system robustness, and have integrated output discharge function to
ensure completely controlled discharging of the output voltage
capacitor. They provide a complete protection solution for applications
subject to heavy capacitive loads and the prospect of short circuit,
and offer reverse current blocking, over-current, over-temperature
and short-circuit protection, as well as controlled rise time and
under-voltage lockout functionality. A 7ms deglitch capability on the
open-drain Flag output prevents false over-current reporting and does
not require any external components. AP2401 and AP2411 will be
latched off after 7ms deglitch.
All devices are available in SO-8, MSOP-8, MSOP-8EP,
U-DFN3030-8 and U-DFN2020-6 packages.
Features
Single Channel Current-Limited Power Switch
Output Discharge Function
Output Current Latch-Off when OCP Triggered
Fast Short-Circuit Response Time: 2µs
2.5A Accurate Current Limiting
Reverse Current Blocking
70mOn-Resistance
Input Voltage Range: 2.7V - 5.5V
Built-In Soft-Start with 0.6ms Typical Rise Time
Over-Current and Thermal Protection
Fault Report (FLG) with Blanking Time (7ms typ)
ESD Protection: 2kV HBM, 200V MM
Active Low (AP2401) or Active High (AP2411) Enable
Ambient Temperature Range: -40°C to +85°C
SO-8, MSOP-8, MSOP-8EP, U-DFN3030-8 and U-DFN2020-6:
Available in “Green” Molding Compound (No Br, Sb)
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3) 
UL Recognized, File Number E322375
IEC60950-1 CB Scheme Certified
Pin Assignments
(Top View)
GND 1
8 NC
IN 2
7 OUT
IN 3
6 OUT
EN 4
5 FLG
GND
IN
IN
EN
1
2
3
4
SO-8
(Top View)
8 NC
7 OUT
6 OUT
5 FLG
MSOP-8/MSOP-8EP
Note: Latter with exposed pad
(dotted line)
(Top View)
GND 1
IN 2
IN 3
EN 4
8 NC
7 OUT
6 OUT
5 FLG
U-DFN3030-8
U-DFN2020-6
Applications
LCD TVs & Monitors
Set-Top-Boxes, Residential Gateways
Laptops, Desktops, Servers, e-Readers
Printers, Docking Stations, HUBs
Notes:
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
AP2401/AP2411
Document number: DS35113 Rev. 6 - 2
1 of 18
www.diodes.com
March 2013
© Diodes Incorporated


Diodes Semiconductor Electronic Components Datasheet

AP2411 Datasheet

2.0A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH

No Preview Available !

AP2401/AP2411
Typical Applications Circuit
Enable Active High
Power Supply
2.7V to 5.5V
10k
IN
0.1uF
OUT
FLG
ON
OFF
EN GND
Load
0.1uF
120uF
Available Options
Part
Number
Channel
Enable Pin
(EN)
AP2401
1 Active Low
AP2411
1 Active High
Recommended Maximum
Continuous Load Current
(A)
Typical Output Latch-Off
Current Limit
(A)
2 2.5
Package
SO-8
MSOP-8
MSOP-8EP
U-DFN3030-8
U-DFN2020-6
Pin Descriptions
Pin Name
GND
IN
EN
FLG
OUT
NC
Exposed Pad
SO-8,
MSOP-8
1
2, 3
4
5
6, 7
8
Pin Number
MSOP-8EP,
U-DFN3030-8
U-DFN2020-6
12
2, 3 1
43
54
6, 7 5
86
Exposed Pad Exposed Pad
Function
Ground
Voltage Input Pin. Connect a 0.1µF or larger ceramic capacitor from IN to GND as close
as possible. (all IN pins must be tied together externally)
Enable Input. Active low (AP2401) or active high (AP2411).
Over-temperature and over-current fault reporting with 7ms deglitch; active low open-drain
output. FLG is disabled for 7ms after turn-on.
Voltage Output Pin (all OUT pins must be tied together externally)
No Internal Connection. Recommend tie to OUT pins.
Exposed pad. It should be externally connected to GND plane and thermal mass for
enhanced thermal impedance. Exposed pad should not be used as electrical ground
conduction path.
AP2401/AP2411
Document number: DS35113 Rev. 6 - 2
2 of 18
www.diodes.com
March 2013
© Diodes Incorporated


Part Number AP2411
Description 2.0A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH
Maker Diodes
Total Page 18 Pages
PDF Download

AP2411 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 AP2411 2.0A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH
Diodes
2 AP2411A 2.0A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH
Diodes





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy