Download the AP3127H datasheet PDF.
This datasheet also covers the AP3127 variant, as both devices belong to the same green mode pwm controller family and are provided as variant models within a single manufacturer datasheet.
General Description
The AP3127/H is a current mode PWM controller which is optimized for high performance, low standby power and cost effective offline flyback converters.
Key Features
are included, such as cycle-bycycle current limit (OCP), VCC Over Voltage Protection (VOVP), internal OTP, Over Load Protection (OLP) and pins’ fault protection. AP3127/H combines secondary side OVP (SOVP) and UVP. (Top View) Pin 1 Mark
GND 1 FB 2
SOVP/UVP 3
6 GATE 5 VCC 4 SENSE
SOT26
Features.
Full PDF Text Transcription for AP3127H (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
AP3127H. For precise diagrams, and layout, please refer to the original PDF.
NEW PRODUCT AP3127/H GREEN MODE PWM CONTROLLER Description Pin Assignments The AP3127/H is a current mode PWM controller which is optimized for high performance, low stan...
View more extracted text
mode PWM controller which is optimized for high performance, low standby power and cost effective offline flyback converters. The AP3127/H coordinating with Diodes’ secondary side controller AP4320 and protocol decoding IC AP4370 provide a Flyback charger/adapter solution compatible to Qualcomm Quick Charge 2.0 protocol. The PWM switching frequency at normal operation is internally fixed (about 65kHz for AP3127 and 100kHz for AP3127H). In middle load, the IC will enter green mode to improve system efficiency with the help of frequency foldback. A minimum switching frequency (about 20kHz) is set to avoid the audible noise.
AP3127H Datasheet
