At heavy load, the constant frequency PWM control performs excellent stability and transient response.
No external compensation components are required.
Key Features
include over-temperature and short circuit protection, and under-voltage lockout to prevent deep battery discharge. The AP3419 delivers 2A maximum output current while consuming only 90μA of no-load quiescent current. Ultra-low RDS(ON) integrated MOSFETs and 100% duty cycle operation make the AP3419 an ideal choice for high output voltage, high current.
Full PDF Text Transcription for AP3419 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
AP3419. For precise diagrams, and layout, please refer to the original PDF.
NOT RECOMMENDED FOR NEW DESIGN USE AP61300 AP3419 1.0MHZ, 2A STEP-DOWN DC-DC BUCK CONVERTER Description The AP3419 is a 2A step-down DC-DC converter. At heavy load, the c...
View more extracted text
ion The AP3419 is a 2A step-down DC-DC converter. At heavy load, the constant frequency PWM control performs excellent stability and transient response. No external compensation components are required. Pin Assignments (Top View) Pin 1 Mark The AP3419 supports a range of input voltages from 2.7V to 5.5V, allowing the use of a single Li+/Li- polymer cell, multiple Alkaline/NiMH cell, and other standard power sources. The output voltage is adjustable from 0.6V to the input voltage. The AP3419 employs internal power switch and synchronous rectifier to minimize external part count and realize high efficiency.
AP3419 Datasheet
