AUR9801D Datasheet | Diodes Incorporated

Description Pin Assignments The AUR9801D is a highly-integrated battery charger for single-cell Li-ion or Li-polymer batteries capable of operating with an input voltage reached 2.5V. It is a plete charger device designed to work with an USB port or 5V output AC adapter. (Top View) Pin 1 Mark The AUR9801D operates with CC (constant current) mode and CV (constant voltage) mode profiles. A low-current preconditioning charge mode is also provided as a trickle charging operation. The charge current is programmable up to 1A with an external resistor or a logic input. The charge voltage is 0.6% accurate over the full application range. When operating with a current-limited adapter, the charger minimizes the thermal dissipation with pulsed operations to prevent overheat conditions that is monly occurred with conventional linear chargers. The AUR9801D reduces charge current for thermal foldback to ensure product safe operation. The charger automatically recharges the battery when the battery voltage drops below a recharge threshold. The chip includes a safety timer for setting the fast charge time limit in case of charging a dead battery. Additional features include preconditioning of an over-discharged battery and charging the battery in a safe temperature range with an NTC thermistor interface. The thermally enhanced DFN package is offered for space limited handheld applications. VIN 1 FAULT 2 STATUS 3 TIME 4 GND 5 10 VBAT 9 TEMP 8 IREF 7 V2P8 6 EN WDFN-3×3-10 Applications - PDAs, Cell Phones and Smart Phones - Digital Camera, MP3 and Handheld Gamming - Portable Instruments including Medical Handhelds - Self-Charging Battery Packs - Stand-Alone Chargers or USB Port Chargers The AUR9801D is available in WDFN-3X3-10 package. Features - plete Charger for Single-Cell Li-ion Batteries - Charges from either AC Adapter or USB Port - Integrated Power Pass Device with Current Sensing - No External Blocking Diode Required - Pre-charge Condition with Safety Timing -...