BSP75G Datasheet | Diodes Incorporated

ADVANCE INFORMATION 60V SELF-PROTECTED LOW-SIDE INTELLIFET MOSFET SWITCH Product Summary - Continuous Drain Source Voltage: VDS = 60V - On-State Resistance: 550mΩ - Nominal Load Current (VIN = 5V) : 1.4A - Clamping Energy: 550m J Description The BSP75G is a self-protected low-side MOSFET. It Features monolithic over temperature, over current, over voltage (active clamp) and ESD protected logic level functionality. It is intended as a general purpose switch. Applications - Especially Suited for Loads with a High In-Rush Current such as Lamps and Motors - All Types of Resistive, Inductive and Capacitive Loads in Switching Applications - μC patible Power Switch for 12V and 24V DC Applications - Automotive Rated - Replaces Electromechanical Relays and Discrete Circuits - Linear Mode Capability - the current-limiting protection circuitry is designed to de-activate at low VDS to in order not to promise the load current during normal operation. The maximum DC operating current is therefore determined by the thermal capability of the package/board bination, rather than by the protection circuitry. Features and Benefits - Short Circuit Protection with Auto Restart - Over Voltage Protection (Active Clamp) - Thermal Shutdown with Auto Restart - Over-Current Protection - Input Protection (ESD) - Load Dump Protection (Actively Protects Load) - Logic Level Input - High Continuous Current Rating - Lead-Free Finish; Ro HS pliant (Note 1 & 2) - Halogen and Antimony Free. “Green” Device (Note 3) - An Automotive-pliant Part is Available Under Separate Datasheet...