BSP75N
BSP75N is 60V SELF-PROTECTED LOW-SIDE Intelli FET MOSFET SWITCH manufactured by Diodes Incorporated.
60V SELF-PROTECTED LOW-SIDE Intelli FET MOSFET SWITCH
Product Summary
- Continuous Drain-Source Voltage: VDS = 60V
- On-State Resistance: 500mΩ
- Max Nominal Load Current (VIN = 5V): 1.1A
- Min Nominal Load Current (VIN = 5V): 0.7A
- Clamping Energy: 550m J
Description
The BSP75N is a self-protected, low-side Intelli FET® MOSFET. It Features monolithic overtemperature, overcurrent, overvoltage (active clamp), and ESD protected logic-level functionality. It is intended as a general-purpose switch.
Features and Benefits
- Short-Circuit Protection with Auto Restart
- Overvoltage Protection (Active Clamp)
- Thermal Shutdown with Auto Restart
- Overcurrent Protection
- Input Protection (ESD)
- Load-Dump Protection (Actively Protects Load)
- Logic-Level Input
- High Continuous Current Rating
- Lead-Free Finish; Ro HS pliant (Notes 1 & 2)
- Halogen and Antimony Free. “Green” Device (Note 3)
- An automotive-pliant part is available under separate datasheet (BSP75NQ)
Applications
- Especially suited for loads with high inrush current, such as lamps and motors
- All types of resistive, inductive, and capacitive loads in switching applications
- µC patible power switches for 12V and 24V DC applications
- Replaces electromechanical relays and discrete circuits
- Linear mode capabilities- current-limiting protection circuitry is designed to deactivate at low VDS to not promise the load current during normal operation. Maximum DC operating current is therefore determined by thermal capability of the package/board bination rather than by protection circuitry, which does not promise the product’s ability to self-protect at low VDS.
SOT223 (Type DN)
Mechanical Data
- Package:...
