Maximum Ratings (Per Leg) (@TA = +25°C, unless otherwise specified.)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Output Current Per Device
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Peak Repetitive Reverse Surge Current (2μS - 1Khz)
Repetitive Peak Avalanche Power (1μs, +25°C)
Non-Repetitive Avalanche Energy (TJ = +25°C, IAS = 12A L = 10mH)
Thermal Characteristics (Per Leg)
Typical Thermal Resistance
Thermal Resistance Junction to Case (Note 5)
Thermal Resistance Junction to Ambient (Note 5)
Operating and Storage Temperature Range
-65 to +150
Electrical Characteristics (Per Leg) (@TA = +25°C, unless otherwise specified.)
Forward Voltage Drop
Leakage Current (Note 6)
IF = 10A, TJ = +25°C
IF = 10A, TJ = +125°C
IF = 20A, TJ = +25°C
VR = 60V, TJ = +25°C
VR = 60V, TJ = +125°C
5. Mounted heatsink black Aluminum, 45mm*20mm*12mm, minimum recommended pad layout as shown on Diodes Inc. suggested pad layout document
AP02001, which can be found on our website at http://www.diodes.com.
6. Short duration pulse test used to minimize self-heating effect.
TA = +150°C
5 TA = +125°C
3 TA = +85°C
TA = +25°C
0 5 10 15
IF(AV) AVERAGE FORWARD CURRENT (A)
Figure 1 Forward Power Dissipation
0 100 200 300 400 500 600 700 800
VF, INSTANTANEOUS FORWARD VOLTAGE (mV)
Figure 2 Typical Forward Characteristics
Note: 7. Mounted heatsink, black Aluminum, 45mm*20mm*12mm,min recommended pad layout layout.
SBR is a registered trademark of Diodes Incorporated.
Document number: DS36363 Rev. 1 - 2
2 of 5
© Diodes Incorporated