ZXGD3001E6 Datasheet | Diodes Incorporated

Description The ZXGD3001E6 is a high-speed non-inverting single MOSFET gate driver capable of driving up to 9A into a MOSFET or IGBT gate capacitive load from supply voltages up to 12V with typical propagation delay times down to 3ns and rise/fall times down to 11ns. This device ensures rapid switching of the power MOSFET or IGBT to minimize power losses and distortion in high-current fast-switching applications. The ZXGD3001E6 is inherently rugged to latchup and shoot-through. Its wide supply voltage range allows full enhancement to minimize onlosses of the power MOSFET or IGBT. Its low-input voltage requirement and high current gain allows high current driving from low voltage controller ICs. The optimized pinout SOT23-6 package with separate source and sink pins eases board layout, enabling reduced parasitic inductance and independent control of rise and fall slew rates. Applications Power MOSFET and IGBT Gate Driving in - Synchronous Switch-Mode Power Supplies - Secondary Side Synchronous Rectification - Plasma Display Panel Power Modules - 1, 2, and 3-phase Motor Control Circuits - Audio Switching Amplifier Power Output Stages SOT26 Top View Internal Device Schematic 12V 9A GATE DRIVER IN SOT26 Features - 12V Operating Voltage Range - 9A Peak Output Current - Fast-Switching Emitter-Follower Configuration - 3ns Propagation Delay Time - 11ns Rise/Fall Time, 1000p F Load - Low-Input Current Requirement - 4.2A (source)/2.2A (sink) Output Current from 10m A Input - SOT23-6 Package - Separate Source and Sink Outputs for Independent Control of Rise and Fall Time - Optimized Pinout to Ease Board Layout and Minimize Trace Inductance - No Latchup - No Shoot-Through - Near-Zero Quiescent and Output Leakage Current - Totally Lead-Free & Fully Ro HS pliant (Notes 1 & 2) - Halogen and Antimony Free. “Green” Device (Note 3) - For automotive applications requiring specific change control (i.e.: parts qualified to AEC-Q100/101/200, PPAP capable, and manufactured in...