Datasheet4U Logo Datasheet4U.com

ZXGD3004E6 - 40V 8A GATE DRIVER

General Description

The ZXGD3004E6 is a high-speed, non-inverting single gate driver designed for switching MOSFETs or IGBTS.

It can transfer up to 8A peak source/source current into the gate for effective charging and discharging of the capacitive gate load.

Key Features

  • High-Gain Buffer with Typically 1.9A Output from 10mA Input.
  • 8 Amps Peak Output Current.
  • 40V Supply for +20V to -18V Gate Driving to Prevent dV/dt Induced False Triggering and Minimize On-Losses.
  • Emitter-Follower that is Rugged to Latch-Up/Shoot-Though.
  • Fast Switching Emitter-Follower Configuration.
  • 1ns Propagation Delay Time.
  • 14ns Rise/Fall Time, 1500pF load.
  • Optimized Pin-Out to Simplify PCB Layout and Reduce Parasitic Trace Inductances.
  • Near-Zero.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ZXGD3103 SYNCHRONOUS MOSFET CONTROLLER Diodes Incorporated
ZXGD3103N8 SYNCHRONOUS MOSFET CONTROLLER Diodes Incorporated

Other Datasheets by Diodes Incorporated

Part Number Description
ZXGD3001E6 12V 9A GATE DRIVER
ZXGD3002E6 20V 9A GATE DRIVER
ZXGD3003E6 40V 5A GATE DRIVER
ZXGD3003E6Q 40V 5A GATE DRIVER
ZXGD3005E6 25V 10A GATE DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ZXGD3004E6 40V 8A GATE DRIVER IN SOT26 Description The ZXGD3004E6 is a high-speed, non-inverting single gate driver designed for switching MOSFETs or IGBTS. It can transfer up to 8A peak source/source current into the gate for effective charging and discharging of the capacitive gate load. This gate driver ensures rapid switching of the MOSFET to minimize power losses and distortion in high current switching applications. It can typically drive 1.9A into the low gate impedance with just 10mA input from a controller. The turn-on and turn-off switching behaviour of the MOSFET can be individually tailored to suit an application. By defining the switching characteristics appropriately, EMI and cross conduction can be reduced.