ZXGD3104 - SYNCHRONOUS MOSFET CONTROLLER

This page provides the datasheet information for the ZXGD3104, a member of the ZXGD3104N8 SYNCHRONOUS MOSFET CONTROLLER family.

Description

The ZXGD3104 is intended to drive MOSFETs configured as ideal diode replacements.

The device is comprised of a differential amplifier detector stage and high current driver.

Features

5-25V VCC Range.
Operating up to 250kHz.
Suitable for Discontinuous Conduction Mode (DCM), Critical Conduction Mode (CrCM), and Continuous Conduction Mode (CCM) Operation.
Turn-Off Propagation Delay 15ns and Turn-Off Time 20ns.
Proportional Gate Drive Control.
Detector Threshold Voltage -10mV.
Standby Current 5mA.
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2).
Halogen and Antimony Free. “Green” Device (Note 3).
Qualified to AEC-Q101 Sta.

Diodes Incorporated

📥 Download Datasheet

ZXGD3104 SYNCHRONOUS MOSFET CONTROLLER by Diodes - Datasheet Preview — Datasheet preview – ZXGD3104

Datasheet Details

Part number	ZXGD3104
Manufacturer	Diodes Incorporated
File Size	932.38 KB
Description	SYNCHRONOUS MOSFET CONTROLLER
Datasheet	ZXGD3104 Datasheet
Additional preview pages of the ZXGD3104 datasheet.

📁 Similar Datasheet

ZXGD3103 - SYNCHRONOUS MOSFET CONTROLLER (Diodes Incorporated)
ZXGD3103N8 - SYNCHRONOUS MOSFET CONTROLLER (Diodes Incorporated)

Other Datasheets by Diodes

ZXGD3104N8 - SYNCHRONOUS MOSFET CONTROLLER
ZXGD3101 - SYNCHRONOUS RECTIFIER CONTROLLER
ZXGD3101N8 - SYNCHRONOUS RECTIFIER CONTROLLER
ZXGD3101T8 - SYNCHRONOUS RECTIFIER CONTROLLER
ZXGD3102 - ACTIVE OR-ING CONTROLLER
ZXGD3102T8 - ACTIVE OR-ING CONTROLLER
ZXGD3105 - SYNCHRONOUS MOSFET CONTROLLER
ZXGD3105N8 - SYNCHRONOUS MOSFET CONTROLLER

Full PDF Text Transcription

Click to expand full text

Description The ZXGD3104 is intended to drive MOSFETs configured as ideal diode replacements. The device is comprised of a differential amplifier detector stage and high current driver. The detector monitors the reverse voltage of the MOSFET, such that if the body diode conduction occurs, a positive voltage is applied to the MOSFET’s Gate Pin. Once the positive voltage is applied to the Gate, the MOSFET switches on. The detector’s output voltage is then proportional to the MOSFET Drain-Source voltage, and this is applied to the Gate via the driver. This action provides a rapid MOSFET turn-off at zero Drain current.

Published: Mar 2, 2021 |