Datasheet4U Logo Datasheet4U.com

AH1883 - ULTRA-SENSITIVE HALL EFFECT SWITCH

Description

The AH1883 micropower Omnipolar Hall Effect switch IC is designed for portable and battery powered equipment such as cellular phones, cordless phones, camcorders, PDA’s, and portable PC’s.

Features

  • Micropower operation.
  • Operation with North or South Pole.
  • 1.65V to 3.3V battery operation.
  • Chopper stabilized o Superior temperature stability o Extremely Low Switch-Point Drift o Insensitive to Physical Stress.
  • Good RF noise immunity.
  • -40°C to 85°C operating temperature.
  • ESD (HBM) ＞ 6kV in SOT553 and U-DFN2020-3.
  • Small low profile packages: SOT553 and U-DFN2020-3.
  • “Green” Molding Compound.

📥 Download Datasheet

Datasheet preview – AH1883

Datasheet Details

Part number AH1883
Manufacturer Diodes Incorporated
File Size 222.41 KB
Description ULTRA-SENSITIVE HALL EFFECT SWITCH
Datasheet download datasheet AH1883 Datasheet
Additional preview pages of the AH1883 datasheet.

📁 Similar Datasheet

  • AH1889 - HIGH SENSIVITY DUAL UNIPOLAR HALL-EFFECT SWITCH (DIODES)
  • AH1801 - ULTRA-SENSITIVE HALL EFFECT SWITCH (Diodes)
  • AH1802 - ULTRA-SENSITIVE OMNIPOLAR HALL-EFFECT SENSOR SWITCH (Diodes)
  • AH1803 - ULTRA-SENSITIVE HALL EFFECT SWITCH (Diodes)
  • AH1804 - MICROPOWER OMNIPOLAR HALL EFFECT SENSORSWITCH (Diodes)
  • AH1806 - HIGH SENSIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH (Diodes)
  • AH1807 - MEDIUM SENSITIVITY MICROPOWER OMNIPLOAR HALL-EFFECT SWITCH (Diodes)
  • AH1808 - HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH (Diodes)
  • AH1809 - LOW SENSITIVITY MICROPOWER OMNIPLOAR HALL-EFFECT SWITCH (Diodes)
  • AH180N - MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH (Diodes)
Other Datasheets by Diodes Incorporated
  • AH1884 - ULTRA-SENSITIVE HALL EFFECT SWITCH
  • AH1885 - ULTRA-SENSITIVE HALL EFFECT SWITCH
  • AH1886 - ULTRA-SENSITIVE HALL EFFECT SWITCH
  • AH1887 - ULTRA-SENSITIVE HALL-EFFECT SWITCH
  • AH1888 - GENERAL-SENSITIVE HALL-EFFECT SWITCH
  • AH180 - MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH
  • AH182 - (AH182 / AH183) LOW POWER HALL EFFECT SWITCH
  • AH183 - (AH182 / AH183) LOW POWER HALL EFFECT SWITCH

Full PDF Text Transcription

Click to expand full text
AH1883 MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH Description The AH1883 micropower Omnipolar Hall Effect switch IC is designed for portable and battery powered equipment such as cellular phones, cordless phones, camcorders, PDA’s, and portable PC’s. Based on two high sensitivity Hall Effect plates and chopper stabilized architecture, the AH1883 provides reliable solution over the whole operating range. To support portable and battery powered equipment the design has been optimized to operate from 1.65V to 3.3V and consumes 13uW typical with a supply of 1.8V. To minimize PCB space the AH1883 incudes a push-pull output structure, therefore does not require an external pull up resistor, and is packaged in small low profile SOT553 and U-DFN2020-3 packages.
Published: |