AH3764Q Datasheet PDF (HIGH-VOLTAGE / HIGH-SENSITIVITY AUTOMOTIVE HALL-EFFECT LATCH)

AH3764Q - HIGH-VOLTAGE / HIGH-SENSITIVITY AUTOMOTIVE HALL-EFFECT LATCH

Description

NOT RECOMMENDED FOR NEW DESIGN USE AH3724Q AH3764Q HIGH-VOLTAGE, HIGH-SENQSITIVITY AUTOMOTIVE HALL-EFFECT LATCH Pin Assignments The AH3764Q is an AEC-Q100 qualified high-voltage, high-sensitivity Hall-Effect latch IC designed for brushless DC-motor commutation, speed measurement, angular or l

Features

Bipolar Latch Operation (South Pole: On, North Pole: off).
High Sensitivity: Bop and Brp of +40G and -40G Typical.
Single Open-Drain Output with Overcurrent Limit.
3.0V to 28V Operating Voltage Range.
Chopper Stabilized Design Provides.
Superior Temperature Stability.
Minimal Switch Point Drift.
Enhanced Immunity to Stress.
Good RF Noise Immunity.
Reverse Blocking Diode.
Zener Clamp on Supply and Output Pins.

Datasheet Details

Part number	AH3764Q
Manufacturer	Diodes Incorporated
File Size	0.96 MB
Description	HIGH-VOLTAGE / HIGH-SENSITIVITY AUTOMOTIVE HALL-EFFECT LATCH
Datasheet	AH3764Q Datasheet
Additional preview pages of the AH3764Q datasheet.

📁 Similar Datasheet

AH3765Q - HIGH-VOLTAGE MEDIUM-SENSITIVITY AUTOMOTIVE HALL-EFFECT LATCH (Diodes)

AH3767Q - HIGH-VOLTGAE LOW-SENSITIVITY AUTOMOTIVE HALL-EFFECT LATCH (Diodes)

AH3768Q - HIGH-VOLTAGE LOW-SENSITIVITY AUTOMOTIVE HALL-EFFECT LATCH (Diodes)

AH3769Q - LOW-SENSITIVITY AUTOMOTIVE HALL-EFFECT LATCH (Diodes)

AH372 - INTERNAL PULL-UP HALL EFFECT LATCH (Diodes)

AH373 - Internal Pull-up Hall Effect Latch (Anachip)

AH375 - Single Phase Hall Effect Latch (Anachip)

AH3772 - HIGH-SENSITIVITY HALL EFFECT LATCH (Diodes)

AH3774 - HIGH-VOLTAGE HIGH-SENSITIVITY HALL EFFECT LATCH (Diodes)

AH3775 - HIGH-VOLTAGE MEDIUM-SENSITIVITY HALL EFFECT LATCH (Diodes)

Full PDF Text Transcription

Click to expand full text

PRELIMINARY - CONFIDENTIAL Description NOT RECOMMENDED FOR NEW DESIGN USE AH3724Q AH3764Q HIGH-VOLTAGE, HIGH-SENQSITIVITY AUTOMOTIVE HALL-EFFECT LATCH Pin Assignments The AH3764Q is an AEC-Q100 qualified high-voltage, high-sensitivity Hall-Effect latch IC designed for brushless DC-motor commutation, speed measurement, angular or linear encoders and position sensors in automotive applications. To support a wide range of demanding applications, the design is optimized to operate over the supply range of 3.0V to 28V. With chopper stabilized architecture and an internal bandgap regulator to provide temperature compensated supply for internal circuits, the AH3764Q provides a reliable solution over the whole operating range.

Published: Aug 1, 2015 |