Datasheet4U Logo Datasheet4U.com

AP1510 - PWM CONTROL 3A STEP-DOWN CONVERTER

Description

AP1510 consists of step-down switching regulator with PWM control.

These devices include a reference voltage source, oscillation circuit, error amplifier and internal PMOS.

AP1510 provides low-ripple power, high efficiency and excellent transient characteristics.

📥 Download Datasheet

Datasheet Details

Part number AP1510
Manufacturer Diodes Incorporated
File Size 554.08 KB
Description PWM CONTROL 3A STEP-DOWN CONVERTER
Datasheet download datasheet AP1510 Datasheet

📁 Similar Datasheet

  • AP1510 - PWM Control 3A Step-Down Converter (Anachip)
  • AP1511 - PWM Control 5A Step-Down Converter (Anachip Corporation)
  • AP1511 - PWM CONTROL 5A STEP-DOWN CONVERTER (Diodes)
  • AP1512 - 2A/3A PWM Buck DC/DC Converter (Anachip)
  • AP1512 - 2A/3A PWM BUCK DC/DC CONVERTER (Diodes)
  • AP1512A - 2A/3A PWM Buck DC/DC Converter (Anachip)
  • AP1512A - 2A/3A PWM BUCK DC/DC CONVERTER (Diodes)
  • AP1513 - PWM Control 2A Step-Down Converter (Anachip)
  • AP1515 - 1.5A PWM Buck DC/DC Converter (Anachip)
  • AP1516 - 3A PWM Buck DC/DC Converter (Anachip)
Other Datasheets by Diodes Incorporated
  • AP1513 - PWM CONTROL 2A STEP-DOWN CONVERTER
  • AP1501 - 3A PWM BUCK DC/DC CONVERTER
  • AP1506 - 3A PWM BUCK DC/DC CONVERTER
  • AP1507 - 3A PWM BUCK DC/DC CONVERTER
  • AP1509 - 2A PWM BUCK DC/DC CONVERTER
  • AP1520 - PWM CONTROL 2A STEP-DOWN CONVERTER
  • AP1530 - PWM CONTROL 3A STEP-DOWN CONVERTER
  • AP1533 - PWM CONTROL 1.8A STEP-DOWN CONVERTER

Full PDF Text Transcription

Click to expand full text
AP1510 PWM CONTROL 3A STEP-DOWN CONVERTER Description AP1510 consists of step-down switching regulator with PWM control. These devices include a reference voltage source, oscillation circuit, error amplifier and internal PMOS. AP1510 provides low-ripple power, high efficiency and excellent transient characteristics. The PWM control circuit is able to vary the duty ratio linearly from 0 up to 100%. This converter also contains an error amplifier circuit. An enable function, an over current protection and a short circuit protection are built inside, when OCP or SCP happens, the operation frequency will be reduced from 300kHz to 30kHz. Also, an internal compensation block is built in to minimum external component count.
Published: |