AP7365 Datasheet PDF (Fast Transient Low Dropout Linear Regulator)

AP7365 - Fast Transient Low Dropout Linear Regulator

Description

The AP7365 is a 600mA, adjustable and fixed output voltage, low dropout linear regulator.

This device includes pass element, error amplifier, band-gap, current limit and thermal shutdown circuitry.

The device is turned on when EN pin is set to logic high level.

Features

600mA Low Dropout Regulator with EN.
Very Low IQ: 35µA.
Wide Input Voltage Range: 2V to 6V.
Wide Adjustable Output: 0.8V to 5.0V.
Fixed Output Options: 0.8V to 3.9V (0.1V Step Size Possible).
High PSRR: 65dB at 1kHz.
Fast Start-Up Time: 200µs.
Stable with Low ESR, 1µF Ceramic Output Capacitor.
Excellent Load/Line Transient Response.
Low Dropout: 300mV at 600mA.
Current Limit and Short Circuit Protection.
Thermal Shutdown Protection.

Datasheet Details

Part number	AP7365
Manufacturer	Diodes Incorporated
File Size	887.20 KB
Description	Fast Transient Low Dropout Linear Regulator
Datasheet	AP7365 Datasheet
Additional preview pages of the AP7365 datasheet.

📁 Similar Datasheet

AP7361 - 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR (Diodes)

AP7361C - 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR (Diodes)

AP7361E - 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR (DIODES)

AP7361EA - 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR (DIODES)

AP7362 - FAST TRANSIENT ULTRA-LOW DROPOUT LINEAR REGULATOR (Diodes)

AP7362A - FAST TRANSIENT ULTRA-LOW DROPOUT LINEAR REGULATOR (Diodes)

AP7363 - FAST TRANSIENT ULTRA-LOW DROPOUT LINEAR REGULATOR (Diodes)

AP7366 - LOW QUIESCENT CURRENT FAST TRANSIENT LOW DROPOUT LINEAR REGULATOR (Diodes)

AP7369Q - WIDE INPUT-VOLTAGE RANGE 150mA ULDO REGULATOR (DIODES)

AP730P - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)

Full PDF Text Transcription

Click to expand full text

NOT RECOMMENDED FOR NEW DESIGN USE AP7366 AP7365 600mA, LOW QUIESCENT CURRENT FAST TRANSIENT LOW DROPOUT LINEAR REGULATOR Description The AP7365 is a 600mA, adjustable and fixed output voltage, low dropout linear regulator. This device includes pass element, error amplifier, band-gap, current limit and thermal shutdown circuitry. The device is turned on when EN pin is set to logic high level. The characteristics of low dropout voltage and low quiescent current make it suitable for low power applications such as battery powered devices. The typical quiescent current is approximately 35μA. Built-in current-limit and thermal-shutdown functions prevent IC from damage in fault conditions. This device is available with adjustable output from 0.8V to 5.0V, and fixed version with 0.8V, 1.0V, 1.

Published: Jul 28, 2010 |