AP8802H Datasheet PDF (60V 1A LED Step-down Converter) | Download Diodes Incorporated AP8802H

AP8802H - 60V 1A LED Step-down Converter

Description

The AP8802H is a step-down DC/DC converter designed to drive LEDs with a constant current.

The device can drive up to thirteen LEDs, depending on the forward voltage of the LEDs, in series from a voltage source of 8V to 60V.

Features

LED driving current up to 1A.
High efficiency up to 95%.
Operating input voltage up to 60V.
5% nominal accuracy.
High switching frequency up to 700kHz.
PWM/DC input for dimming control.
Built-in output open-circuit protection.
SO-8EP is available in “Green” Molding Compound (No Br, Sb).
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2).
Halogen and Antimony Free. “Green” Device (Note 3) Pin Assignments (Top.

Datasheet Details

Part number	AP8802H
Manufacturer	Diodes Incorporated
File Size	608.71 KB
Description	60V 1A LED Step-down Converter
Datasheet	AP8802H Datasheet
Additional preview pages of the AP8802H datasheet.

📁 Similar Datasheet

AP8800A - COST EFFECTIVE 28V BUCK 1-W LED DRIVER (Diodes)

AP8801 - Step-down DC/DC Converter (Diodes)

AP8804 - Synchronous PFM step-up DC-DC converter (SHIWEI SEMICONDUCTOR)

AP8805 - DC / DC boost converter (SHIWEI ELECTRONIC)

AP8805A - DC / DC boost converter (SHIWEI ELECTRONIC)

AP8805B - DC / DC boost converter (SHIWEI ELECTRONIC)

AP8805C - DC / DC boost converter (SHIWEI ELECTRONIC)

AP8805D - DC / DC boost converter (SHIWEI ELECTRONIC)

AP8805DF - 20V N+N-Channel Enhancement Mode MOSFET (APM)

AP8805F - DC / DC boost converter (SHIWEI ELECTRONIC)

Full PDF Text Transcription

Click to expand full text

N EPWR EPLRIOM IDNUACRTY AP8802H 60V 1A LED STEP-DOWN CONVERTER Description The AP8802H is a step-down DC/DC converter designed to drive LEDs with a constant current. The device can drive up to thirteen LEDs, depending on the forward voltage of the LEDs, in series from a voltage source of 8V to 60V. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminating the need for ballast resistors. The AP8802H switches at frequency up to 700kHz. This allows the use of small size external components, hence minimizing the PCB area needed. Maximum output current of AP8802H is set via an external resistor connected between the VIN and SET input pins. Dimming is achieved by applying either a DC voltage or a PWM signal at the CTRL input pin.

Published: Jul 28, 2010 |