E32D1 Datasheet Text
..
E32D1 Series
- RoHS pliant (Pb-Free)
- PECL Output Oscillators
- 3.3V supply voltage
- Ceramic 6-pad SMD Package
- Stability to ±25ppm
- Tri-State Output
- plementary Output
- Available on Tape and Reel
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) H L W
2.0 7.0 5.0
OSCILLATOR
50, 51.84, 52, 52.08, 54, 57.1429, 61.44, 63.36, 65.536, 76.8, 77.76, 100, 104, 106.25, 125, 126.72, 128, 153.6, 155.52, 156.25, 159.375, 161.1328, 166.6286, 167.3315, 184.32, 186.666MHz Operating Temperature Range 0°C to 70°C -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VCC) 3.3VDC ±5% Input Current 100mA Maximum With Load Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25°C, ±50ppm or ±25ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year Aging, Shock, and Vibration Output Voltage Logic High (VOH) VCC-1.025VDC Minimum Output Voltage Logic Low (VOL) VCC-1.620VDC Maximum Rise Time / Fall Time 1.5 nSeconds Maximum 20% to 80% of waveform Duty Cycle 50 ±10(%) at 50% of waveform 50 ±5(%) Load Drive Capability 50 Ohms into VCC-2.0VDC Control Voltage (VC) 1.65VDC ±1.65VDC Test Conditions for Frequency Deviation Control Voltage Range (VCR) 0.0VDC to VCC +0.5VDC Frequency Deviation ±75ppm Minimum Inclusive of Operating Temperature Range, Supply Voltage Change, and Output Load Change Linearity 20%, 15%, or 10% Maximum Transfer Function Positive Transfer Characteristic Modulation Bandwidth (MBW) 10kHz Minimum Measured at -3dB with Contol Voltage of +1.65VDC Input Impedance (ZI) 50kOhms Typical Typical Phase Noise (Fo = 155.520MHz) at 10Hz Offset -55dBc/Hz -90dBc/Hz at 100Hz Offset -120dBc/Hz at 1kHz Offset -140dBc/Hz at 10kHz Offset...